DESCRIPTION

The TSOP93...P10TR series devices are the latest

generation miniaturized IR receiver modules for infrared

remote control systems. These series provide

improvements in sensitivity to remote control signals in dark

ambient as well as in sensitivity in the presence of optical

disturbances e.g. from CFLs.

The devices contain a PIN diode and a preamplifier

assembled on a lead frame. The epoxy package contains an

IR filter. The demodulated output signal can be directly

connected to a microprocessor for decoding.

The TSOP936..,P10TR series devices are designed to

receive long burst codes (10 or more carrier cycles per

burst). The third digit designates the AGC level (AGC6) and

the last two digits designate the band-pass frequency (see

table below). The higher the AGC, the better noise is

suppressed, but the lower the code compatibility. AGC6

provides maximized noise suppression. Generally, we

advise to select the highest AGC that satisfactorily receives

the desired remote code.

These components have not been qualified to automotive

specifications.

FEATURES

• Improved dark sensitivity

• Improved immunity against optical noise

• Very low supply current

• Photo detector and preamplifier in one package

• Internal filter for PCM frequency

• Supply voltage: 2.0 V to 3.6 V

• Insensitive to supply voltage ripple and noise

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912