INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intens

文件：209.87 Kbytes 页数：14 Pages

TAOS

LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL250RD, TSL251RD, TSL260RD, and TSL261RD are light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier on a single monolithic IC. The TSL250RD and TSL260RD have an equivalent feedback resistance of 16 MΩ and a photodiode measuring 1 square mm.

文件：189.7 Kbytes 页数：12 Pages

TAOS

LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL250RD, TSL251RD, TSL260RD, and TSL261RD are light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier on a single monolithic IC. The TSL250RD and TSL260RD have an equivalent feedback resistance of 16 MΩ and a photodiode measuring 1 square mm.

文件：627.2 Kbytes 页数：13 Pages

AMSCO

艾迈斯欧司朗

INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intens

文件：209.87 Kbytes 页数：14 Pages

TAOS

INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intens

文件：209.87 Kbytes 页数：14 Pages

TAOS

IR LIGHT-TO-VOLTAGE OPTICAL SENSORS

• Integral Visible Light Cutoff Filter • Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components • Converts Light Intensity to Output Voltage • High Irradiance Responsivity Typically 42 mV/(mW/cm2) at lp = 940 nm (TSL260)

文件：133.7 Kbytes 页数：9 Pages

TI

德州仪器

IR LIGHTTOVOLTAGE OPTICAL SENSORS

[TAOS] Description The TSL260, TSL261, and TSL262 are light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2 MΩ, respectively) on a single monolithic integrated circuit. The output voltage is directly proportional to t

文件：135.15 Kbytes 页数：10 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intens

文件：642.38 Kbytes 页数：15 Pages

AMSCO

艾迈斯欧司朗

INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intens

文件：209.87 Kbytes 页数：14 Pages

TAOS

INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS

Description The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intens

文件：209.87 Kbytes 页数：14 Pages

TAOS