Dual Monostable Multivibrator

General Description The 342 provides two one-shots that can be independently triggered and timed. Output pulse widths are timed by an external capacitor, making them independent of the input trigger pulse widths. Expander inputs and complementary, active pullup outputs are provided. Applications

文件：384.1 Kbytes 页数：3 Pages

Microsemi

美高森美

Digital Comparator

Digital Comparator ● 4-Bit Features ● IDEAL FOR DIGITAL CONTROLS REQUIRING COMPARATORS ● CASCADES TO COMPARE LARGE BINARY OR BCD NUMBERS ● ACTIVE-HIGH OUTPUTS ● STROBBE INPUT

文件：412.91 Kbytes 页数：3 Pages

Microsemi

美高森美

Dual Retriggerable Monostable Multivibrator

Features ● DELIVERS TIMED OUTPUT PULSES DETERMINED BY EXTERNAL COMPONENTS ● RETRIGGERABLE OPERATION ● HIGH IMMUNITY TO POWER TRANSIENTS ● ACTIVE PULLUP COMPLEMENTARY OUTPUTS ● INVERTING AND NON-INVERTING TRIGGER INPUTS ● 3.5 VOLTS (MIN) NOISE IMMUNITY

文件：600.55 Kbytes 页数：4 Pages

Microsemi

美高森美

Multiplexers

General Description Teledyne Semiconductor 350 8-Bit, and 351 Dual 4-Bit Multiplexers were designed to enhance the functional capabilities of the high voltage logic designer. The devices exhibit the high noise immunity (3.5V min.) characteristic of the Teledyne HiNIL family. Each device is provi

文件：732.42 Kbytes 页数：4 Pages

Microsemi

美高森美

Multiplexers

General Description Teledyne Semiconductor 350 8-Bit, and 351 Dual 4-Bit Multiplexers were designed to enhance the functional capabilities of the high voltage logic designer. The devices exhibit the high noise immunity (3.5V min.) characteristic of the Teledyne HiNIL family. Each device is provi

文件：732.42 Kbytes 页数：4 Pages

Microsemi

美高森美

Timer

Features ● Timing - From Microseconds to Hours ● CMOS and HiNIL Compatible Input/Outputs ● High Current Drive Capability - 100 mA Source or Sink ● No Current Spiking on Output ● Pin Compatible With 555 Timer Typical Applications Time Delay Generation Clock Generation Pulse Genera

文件：489.9 Kbytes 页数：4 Pages

Microsemi

美高森美

Dual 11-16V to 5 Volt Interface

General Description The 361 is used to convert HiNIL logic levels to DTL, TTL and RTL logic levels. It is very simple to use, nearly requiring connection to the VCC output level desired for adjustment of the output to the lower logic level. Features ● DROPS HINIL LOGIC LEVELS TO LOWER LOGIC LEV

文件：227.54 Kbytes 页数：2 Pages

Microsemi

美高森美

5 Volt 11-16V Interface

5 Volt 11-16V Interface ● Dual Transistor ● Quad 2-Input NAND

文件：427.82 Kbytes 页数：4 Pages

Microsemi

美高森美

5 Volt 11-16V Interface

5 Volt 11-16V Interface ● Dual Transistor ● Quad 2-Input NAND

文件：427.82 Kbytes 页数：4 Pages

Microsemi

美高森美

Schmitt Trigger

Schmitt Trigger • Quad (Active Pullup) • Quad (Open Collector)

文件：1.06805 Mbytes 页数：6 Pages

Microsemi

美高森美