Description

The TS83102G0B is a monolithic 10-bit analog-to-digital converter, designed for digitizing wide bandwidth analog signals at very high sampling rates of up to 2 Gsps. It uses an innovative architecture, including an on-chip Sample and Hold (S/H). The 3.3 GHz full power input bandwidth and band flatness performances enable the digitizing of high IF and large bandwidth signals.

Features

• Up to 2 Gsps Sampling Rate

• Power Consumption: 4.6 W

• 500 mVpp Differential 100 Ω or Single-ended 50 Ω (±2 ) Analog Inputs

• Differential 100 Ω or Single-ended 50 Ω Clock Inputs

• ECL or LVDS Output Compatibility

• 50 Ω Differential Outputs with Common Mode not Dependent on Temperature

• ADC Gain Adjust

• Sampling Delay Adjust

• Offset Control Capability

• Data Ready Output with Asynchronous Reset

• Out-of-range Output Bit

• Selectable Decimation by 32 Functions

• Gray or Binary Selectable Output Data; NRZ Output Mode

• Pattern Generator Output (for Acquisition System Monitoring)

• Radiation Tolerance Oriented Design (More Than 100 Krad (Si) Expected)

• CBGA 152 Cavity Down Hermetic Package

• CBGA Package Evaluation Board TSEV83102G0BGL

• Companion Device: DMUX 8-/10-bit 1:4/1:8 2 Gsps TS81102G0

Performance

• 3.3 GHz Full Power Input Bandwidth (-3 dB)

• Gain Flatness: ± 0.2 dB (from DC up to 1.5 GHz)

• Low Input VSWR: 1.2 Max from DC to 2.5 GHz

• SFDR = -59 dBc; 7.6 Effective Bits at FS = 1.4 Gsps, FIN = 700 MHz [-1 dBFS]

• SFDR = -53 dBc; 7.1 Effective Bits at Fs = 1.4 Gsps, FIN = 1950 MHz [-1 dBFS]

• SFDR = -54 dBc; 6.5 Effective Bits at FS = 2 Gsps, FIN = 2 GHz [-1 dBFS]

• Low Bit Error Rate (10-12) at 2 Gsps

Application

• Direct RF Down Conversion

• Wide Band Satellite Receiver

• High-speed Instrumentation

• High-speed Acquisition Systems

• High-energy Physics

• Automatic Test Equipment

• Radar