TS3USB30RSWR集成电路（IC）的模拟开关-特殊用途规格书PDF中文资料

TS3USB30RSWR属于集成电路（IC）的模拟开关-特殊用途。由德州仪器制造生产的TS3USB30RSWR模拟开关 - 特殊用途特殊用途模拟开关通过固态设备路由模拟信号。该系列产品的与众不同之处在于，这些模拟开关针对特定的应用，因此具有通用模拟开关通常所没有的独特功能。

1 Features

1• VCC Operation at 3 V and 4.3 V

• 1.8-V Compatible Control-Pin Inputs

• IOFF Supports Partial Power-Down-Mode

Operation

• Ron = 10 Ω Maximum

• ΔR on <0.35 Ω Typical

• Cio(ON) = 7 pF Typical

• Low Power Consumption (1 μA Maximum)

• ESD Performance Tested Per JESD 22

– 6000-V Human Body Model (HBM)

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

– 250-V Machine Model (A115-A)

• –3-dB Bandwidth = 955 MHz Typical

• Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)

2 Applications

• Routes Signals for USB 1.0, 1.1, and 2.0

• Mobile Industry Processor Interface (MIPI) Signal

Routing

3 Description

The TS3USB30 is a high-bandwidth switch specially

designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such

as cell phones, digital cameras, and notebooks with

hubs or controllers with limited USB I/Os. The wide

bandwidth (955 MHz) of this switch allows signals to

pass with minimum edge and phase distortion. The

device multiplexes differential outputs from a USB

host device to one of two corresponding outputs. The

switch is bidirectional and offers little or no

attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-

to-channel noise isolation, and is compatible with

various standards, such as high-speed USB 2.0 (480

Mbps).