TS3USB30E中文资料具有单独使能和 ESD 保护的高速 USB 2.0 1:2 多路复用/多路解复用开关数据手册TI规格书

描述 Description

The TS3USB30E is a high-bandwidth 1:2 switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
The TS3USB30E integrates ESD protection cells on all pins, is available in a tiny UQFN package (1.8 mm × 1.4 mm) or a VSSOP package, and is characterized over the free-air temperature range of –40°C to 85°C.

特性 Features

• VCC Operation at 3 V to 4.3 V
• 1.8-V Compatible Control-Pin Inputs
• RON = 10 Ω Maximum
• Cio(ON) = 7.5 pF Typical
• –3-dB Bandwidth = 900 MHz Typical
• ESD Performance Tested Per JESD 22
• 1000-V Charged-Device Model (C101)
•
• Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)

简介

TS3USB30E属于集成电路（IC）的模拟开关-特殊用途。由TI制造生产的TS3USB30E模拟开关 - 特殊用途特殊用途模拟开关通过固态设备路由模拟信号。该系列产品的与众不同之处在于，这些模拟开关针对特定的应用，因此具有通用模拟开关通常所没有的独特功能。