TS13101M数据手册集成电路（IC）的配电开关负载驱动器规格书PDF

描述 Description

The TS13101M is a galvanically isolated 60V solid state relay with bi-directional blocking. The device includes a single integrated 110mΩ high voltage switch allowing high efficiency switching of power loads or other high current applications. The input pin, CLK, controls the turn on/off of the switch. When the correct CLK sequence is provided the switch will latch on and stay on until the turn off sequence is given or a fault is detected.
The TS13101M includes several protection features. Each switch has an integrated over-current shut-down to prevent device damage during short-circuit or other unusually high load conditions. If an over-current event is detected for a time, the FET is latched off until the CLK turn on sequence is given. While the CLK pin is active after an over-current event or in the event of an incorrect turn-on sequence, the DATA pin is toggled at 1/4 the CLK frequency. 

特性 Features

• Low Quiescent Operating Currents
           2μA/4μA in OFF/ON state
• Scalable galvanic isolation from primary to secondary
           sides of the device
• Single control signal for on/off input (CLK)
           Operation from 2.7V to 5.5V
           Compatible with standard microcontrollers
• Switch Characteristics
          High voltage switch with bi-directional blocking in OFF
           state
          60V switch and 110mΩ RDS(on)
          Up to 4A operating current
• Transient protection for SW1 and SW2 to:
           IEC 61000-4-2 (ESD) ±30kV (air), ±30kV (contact)
           IEC 61000-4-4 (EFT) 40A (5/50ns) level 4
           IEC 61000-4-5 (Surge/Lightning) 160V with 2: internal
           impedance (1.2/50μs)

应用 Application

·Power load/rail switching

·Input supply multiplexing

·Isolated power supplies

·Solid state relays

·HVAC control