Battery Management Under-Voltage Load Switch

Description The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-d

文件：1.14959 Mbytes 页数：11 Pages

SEMTECH

先之科

Nanopower Voltage Detector with Dual Outputs

DESCRIPTION The TS12001 voltage detector combines a 0.58V reference and a comparator with resettable comparator latch in a single package. The TS12001 operates from a single 0.65V to 2.5V power supply and consumes less than 1µA total supply current. Optimized for ultra-long life operation, the

文件：1.24137 Mbytes 页数：11 Pages

SILABS

芯科科技

A 0.65V/1關A Nanopower Voltage Detector with Dual Outputs

DESCRIPTION The TS12001 voltage detector combines a 0.58V reference and a comparator with resettable comparator latch in a single package. The TS12001 operates from a single 0.65V to 2.5V power supply and consumes less than 1µA total supply current. Optimized for ultra-long life operation, the

文件：872.09 Kbytes 页数：8 Pages

TOUCHSTONE

nanoSmart짰 Battery Management Under-Voltage Load Switch

文件：1.00755 Mbytes 页数：11 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

nanoSmart® Battery Management Under-Voltage Load Switch

The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-drain indicator pi ·Off-Active™ feature with ultra-low pico-amp current\n·Best-in-class Off-active™ quiescent current of 100pA\n·Ultra-low on-active quiescent current of 70nA\n·Accurate on to Off-active™ voltage threshold\n·Threshold voltage options of 1.2V - 4.2V in 100mV steps (programmed at manufacturing)\n·Supervi;

Semtech

先之科

Battery Management Under-Voltage Load Switch

Description The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-d

文件：1.14959 Mbytes 页数：11 Pages

SEMTECH

先之科

Battery Management Under-Voltage Load Switch

Description The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-d

文件：1.14959 Mbytes 页数：11 Pages

SEMTECH

先之科

Battery Management Under-Voltage Load Switch

Description The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-d

文件：1.14959 Mbytes 页数：11 Pages

SEMTECH

先之科

Battery Management Under-Voltage Load Switch

Description The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-d

文件：1.14959 Mbytes 页数：11 Pages

SEMTECH

先之科

Battery Management Under-Voltage Load Switch

Description The TS12001 Off-Active™ battery management load switch is used to protect a battery from excessive discharge. It consists of an internally generated threshold voltage (VTHRESH), comparator with hysteresis, slew rate control for the load switch, a P-Channel load switch, and an open-d

文件：1.14959 Mbytes 页数：11 Pages

SEMTECH

先之科