TRS3232E-Q1中文资料具有 +/-15kV IEC-ESD 保护的汽车类 3V 至 5.5V 250kbps RS-232 线路驱动器/接收器数据手册TI规格书

描述 Description

The TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

特性 Features

• Qualified for Automotive Applications
• ESD Protection for RS-232 Bus Pins
• ±15-kV Human Body Model (HBM)
• ±8 kV (IEC61000-4-2, Contact Discharge)
• ±15 kV (IEC61000-4-2, Air-Gap Discharge)

• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
• Operates With 3-V to 5.5-V VCC Supply
• Operates up to 250 kbit/s
• Two Drivers and Two Receivers
• Low Supply Current: 300 µA (Typ)
• External Capacitors: 4 × 0.1 µF
• Accepts 5-V Logic Input With 3.3-V Supply
• Pin Compatible to Alternative High-Speed Device (1 Mbit/s): TRSF3232E