LOW PROFILE 2 FORM C RELAY

FEATURES • High sensitivity: 2 Form C: 140 mW power consumption (single side stable type) 4 Form C: 280 mW power consumption (single side stable type) • Surge voltage withstand: 1500 V FCC Part 68 • Sealed construction allows automatic washing • Self-clinching terminal also

文件：151.72 Kbytes 页数：7 Pages

NAIS

松下电器

3V Cellular TDMA/AMPS LNA/mixer Receiver IC

Product Description The TQ5121 is a 3V, RF receiver IC designed specifically for Cellular band TDMA applications. It’s RF performance meets the requirements of products designed to the IS-136 and AMPS standards. The TQ5121 is pin compatible with TQ9222, which enables handset designers to use stra

文件：153.58 Kbytes 页数：10 Pages

TriQuint

3V Cellular TDMA/AMPS Receiver IC With Power- Down

Product Description The TQ5122 is a 3V, RF receiver IC designed specifically for Cellular band TDMA applications. It’s RF performance meets the requirements for products designed to the IS-136 TDMA and the AMPS standards. The TQ5122 includes a power–down mode which allows current saving during st

文件：84.89 Kbytes 页数：9 Pages

TriQuint

3V Cellular Band CDMA/AMPS RFA/Mixer IC

Product Description The TQ5131 is a 3V, RFA/Mixer IC designed specifically for Cellular band CDMA/AMPS applications. It’s RF performance meets the requirements of products designed to the IS-95 and AMPS standards. The TQ5131 is designed to be used with the TQ3131 (CDMA/AMPS LNA) which provides a

文件：111.12 Kbytes 页数：14 Pages

TriQuint

3V Cellular Band CDMA/AMPS RFA/Mixer IC

Product Description The TQ5132 is a 3V, RFA/Mixer IC designed specifically for Cellular band CDMA/AMPS applications. It’s RF performance meets the requirements of products designed to the IS-95 and AMPS standards. The TQ5132 is designed to be used with the TQ3131 or TQ3132 (CDMA/AMPS LNA) which p

文件：101.4 Kbytes 页数：12 Pages

TriQuint

3V Cellular CDMA/AMPS LNA/Mixer Receiver IC

Product Description The TQ5135 is an LNA-Downconverter optimized for use in the Korean, Japanese, and US CDMA Bands. The integrated LNA has the gain step function required for CDMA, and features very low NF and excellent IP3. An external resistor controls LNA bias, making LNA Idd adjustable. The

文件：355.09 Kbytes 页数：22 Pages

TriQuint

2.8V SiGe Dual-Mode CDMA Rx Receiver

Product Description: The TQ5139 is a CDMA Rx Receiver designed for Cell-band, Dual-mode operation. The device supports Cell CDMA and A-GPS. The IF range is from 80 MHz to 230MHz with external tuning. The Low Noise Amplifiers have an adjustable third order intercept (IP3) to minimize inter-modulat

文件：263 Kbytes 页数：16 Pages

TriQuint

3V PCS Receiver IC With Power- Down

Product Description The TQ5622 is a 3V, RF receiver IC designed specifically for PCS band TDMA applications. It’s RF performance meets the requirements for products designed to the IS-136 TDMA standards. The TQ5622 includes a power–down mode which allows current saving during standby and the non-

文件：80.6 Kbytes 页数：9 Pages

TriQuint

3V PCS Band CDMA RFA/Mixer IC

Product Description The TQ5631 is a 3V, RFAmplifier/Mixer IC designed specifically for PCS band CDMA applications. It’s RF performance meets the requirements of products designed to the IS-95 standards. The TQ5631 is designed to be used with the TQ3631 (CDMA LNA) which provides a complete CDMA re

文件：100.68 Kbytes 页数：14 Pages

TriQuint

3V PCS Band CDMA RFA/Mixer IC(WIRELESS COMMUNICATIONS DIVISION)

Product Description The TQ5633 is a 3V, RF Amplifier/Mixer IC designed specifically for PCS band CDMA applications. It’s RF performance meets the requirements of products designed to the IS-95 standard. The TQ5633 is designed to be used with an IF frequency of 110MHz, and uses a balanced mixer to

文件：97.72 Kbytes 页数：10 Pages

TriQuint