12V General Purpose Analog Switch

Features ⚫ Analog Switch Voltage: 3.3V, 5V, 10V, ±5V ⚫ Low ON-State Resistance: typical 50Ω at Vs = ±4.5V or 9V typical 60Ω at Vs = 4.5V typical 300Ω at Vs = 3V ⚫ Bandwidth: 200 MHz ⚫ Fast switching times: tON = 60ns, tOFF = 50ns ⚫ Break-Before-Make Switching ⚫ Operation Temperature Ra

文件：1.00332 Mbytes 页数：15 Pages

3PEAK

思瑞浦

12V General Purpose Analog Switch

The TPW4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (An), a common input/output (A) and a digital enable input • Analog Switch Voltage: 3.3V, 5V, 10V, ±5V\n\n• Low ON-State Resistance: \n• typical 50Ω at Vs = ±4.5V or 9V\n\n• typical 60Ω at Vs = 4.5V\n\n• typical 300Ω at Vs = 3V\n\n\n• Bandwidth: 200 MHz\n\n• Fast switching times: tON = 60ns, tOFF = 50ns\n\n• Break-Before-Make Switching\n\n• Operation Temper;

3PEAK

思瑞浦

VTB Process Photodiodes

PRODUCT DESCRIPTION Planar silicon photodiode mounted on a two lead ceramic substrate and coated with a layer of clear epoxy. These diodes have very high shunt resistance and have good blue response.

文件：33.79 Kbytes 页数：1 Pages

PerkinElmer

8-ch Digital Input IoT Wireless I/O Module with RS-485 Port

文件：1.14649 Mbytes 页数：2 Pages

ADVANTECH

研华科技

Intelligent Stack Light Monitoring Sensor

Features ƒƒ One product for all scenarios ƒƒ Fits a variety of stack-type light towers ƒƒ 8 light sensors for fast flexible installation ƒƒ No need to stop the machinery while deployment ƒƒ Modbus RTU with RS-485 interface ƒƒ Supports more than 20 Modbus addresses per channel ƒƒ Remote inte

文件：345.77 Kbytes 页数：2 Pages

ADVANTECH

研华科技