TPT29617A中文资料思瑞浦数据手册PDF规格书

特性 Features

 Dual channel level shift and repeater for

SDA/SCL Lines in I2C Applications and SMBus

Compatible

 Support multi-mode: Standard-mode (SM), Fastmode (FM), and Fast-mode Plus (FM+)

 Open-Drain I2C Input/Output

 Latching free operation

 Allows Voltage-Level Translation Between

− VREF1 range 0.8 V to 5.5 V

− VREF2 range 2.2 V to 5.5 V

 5 V tolerant I2C-bus and enable pins

 High-impedance SCL1, SDA1, SCL2 and SDA2

pins for EN = LOW

 Support Low level output current up to 30 mA

 Latch-Up performance exceeds 600 mA

 ESD Protection:

− 7000-V Human-Body Model

− 1500-V Charged-Device Model

Applications

 I

2C, SMBus, PMBus, MDIO, UART, Low-Speed

SDIO, GPIO, and Other Two-Signal Interfaces

 Servers/Storages

 Routers (Telecom Switching Equipment)

 Personal Computers/Consumer handsets

 Industrial Automation

描述 Description

The TPT29617A device is a dual channel I2C level

shift and repeater function with an enable (EN) input,

and work from 0.8 V to 5.5 V VREF1 and 2.2 V to 5.5 V

VREF2.

The SCL1 and SDA1 I/O are connected to the SCL2

and SDA2 I/O, will allow bidirectional data flow

between ports. If EN is low, the translator switch is off,

and a high-impedance state exists between ports to

isolate both sides.

Dual channel, bidirectional buffer isolates

capacitance and allows 540 pF on either side of the

device at 1 MHz and up to 4000 pF at lower speeds.

TPT29617A is available in SOP8 and MSOP8

package, and is characterized from −40°C to +125°C.