TPT1043数据手册3PEAK中文资料规格书

描述 Description

The TPT1043 is a CAN transceiver that meets the ISO11898 high-speed CAN (Controller Area Network) physical layer standard. The device is designed to be used in CAN FD networks up to 5 Mbps, with enhanced timing margin and higher data rates in long and highly loaded networks. As designed, the device features a –30-V to +30-V common-mode range, CAN-Bus fault protection from -70 V to +70 V, over-voltage protection, and over-temperature shutdown. TPT1043 has an I/O power supply for interface I/O to connect to microcontrollers with supply voltages from 2.8 V to 5.5 V. The device comes with a standby mode, which can be waked up from the CAN BUS. The ultra-low power management controls the node in standby and sleep modes. The device enables the power supply by the INH interface through the local and remote wake-up with wake-up source recognition, and it includes many protection features to enhance the device and network robustness.

The TPT1043 is available in SOP14 and DFN4.5X3.0-14L packages, and is characterized from -40°C to +125°C.

特性 Features

• Meets the ISO 11898-2:2016 and ISO 11898-5:2007 Physical Layer Standards
• Support CAN FD and data rates up to 5 Mbps
• Typical Loop Delay: 110 ns
• 5V power supply, 3.0V~5.5V IO interface
• Low power current in standby mode: 2μA
• Receiver Common Mode Input Voltage: ±30 V
• Bus Fault Protection: ±70 V
• Up to 110 Nodes in CAN network
• Junction Temperatures from –40°C to 150°C
• Latch-Up performance exceeds 300mA
• BUS pin ESD Protection：
• ±12 kV IEC-Contact ESD
• ±8 kV Human-Body Model
• AEC Q100 for Automotive grade1

应用 Application

• All Devices Supporting Highly Loaded CAN Networks
• Field Industrial Automation, Sensor and Driver Systems
• Building, Security Control Systems
• Energy Storage Systems
• Telecom Base Station Status and Control