TPS92001中文资料用于 LED 照明且具有 10V 导通阈值的通用 PWM 控制器数据手册TI规格书

描述 Description

The TPS92001/2 family of general LED lighting PWM controllers containscontrol and drive circuitry required for off-line isolated or non-isolated LEDlighting applications.The controllers can support Phase Cut TRIAC dimming with minimal externalcomponents. The controllers can also be implemented for stage conversion wherethe power factor (PF) exceeds regulatory requirements for lighting. Thesecontrollers also have an accessible 5-V reference that could be used to power amicrocontroller or other low power peripheral components. The controllersoperate in fixed frequency current mode switching with minimal external partscount. Internally implemented circuits include undervoltage lockout featuringstartup current less than 100 µA, logic to ensure latched operation, a PWMcomparator, and a totem pole output stage to sink or source peak current. Theoutput stage, suitable for driving N-Channel MOSFETs, is low in the off state.Oscillator frequency and maximum duty cycle are programmed with two resistorsand a capacitor. The TPS92001/2 family also features full cycle soft start. The family offersUVLO thresholds and hysteresis levels for off-line and DC-to-DC systems. TheTPS92001/2 is offered in the 8-pin MSOP (DGK) and 8-pin SOIC (D) packages. Thesmall MSOP package makes the device ideally suited for applications where board

特性 Features

• Ideal for Single Stage Designs
• Supports Isolated and Non-Isolated Topologies
• Phase-Cut TRIAC Dimmable
• Few External Components Mode Operation
• Wide Duty Cycle Range for Wide-Input Voltage or Dimming Range
• Convenient 5-V Reference Output
• Undervoltage Lockout for Safe Operation
• Operation to 1-MHz
• 0.4-A Source/0.8-A Sink FET Driver
• Low 100-µA Startup Current
• APPLICATIONS
• Residential LED Lighting Drivers for A19 E12/E26/27, GU10, MR16, PAR30/38 Integral Lamps
• Drivers for Wall Sconces, Pathway Lighting and Overhead Lighting
• Drivers for Wall Washing, Architectural and Display Lighting