TPS7A2133BPYWDJ中文资料德州仪器数据手册PDF规格书

1 Features

• Very low IQ: 6.5 μA

• Input voltage range: 2.0 V to 6.0 V

• Output voltage range: 0.8 V to 5.5 V (50-mV steps)

• High PSRR: 91 dB at 1 kHz

• Low output voltage noise: 7.7 μVRMS

• Low dropout:

– 175 mV (maximum) at 500 mA (2.5-V VOUT)

• Smart EN pulldown

• Output voltage tolerance:

– ±1.5% (line, load, and temperature)

• Supports wide range of ceramic capacitors:

– 1 μF to 200 μF

• Operating junction temperature: –40°C to +125°C

• Package:

– 0.602-mm × 0.602-mm power DSBGA

2 Applications

• Mobile phones and tablets

• Wearables

• IP cameras

• Portable medical equipment

• Smart meters and field transmitters

• RF, PLL, VCO, and clock power supplies

• Motor drives

3 Description

The TPS7A21 is an ultra-small, low-dropout (LDO)

linear voltage regulator that can source 500 mA

of output current. The device provides low noise,

high PSRR, and excellent load and line transient

performance to meet the requirements of RF and

other sensitive analog circuits. Innovative design

techniques result in low-noise performance without

the addition of an external noise bypass capacitor.

With the device low quiescent current, the TPS7A21

is a good choice for battery-powered systems. The

2.0-V to 6.0-V input voltage range and 0.8-V to

5.5-V output voltage range support a variety of

system requirements. The internal precision reference

circuit enables excellent accuracy; the maximum

output voltage tolerance is 1.5% over load, line, and

temperature variations.

An internal soft-start circuit helps control the inrush

current, thus minimizing the input voltage drop during

start up. The LDO is stable with small ceramic

capacitors, allowing for a small overall solution size.

A smart enable input circuit with an internally

controlled pulldown resistor keeps the LDO disabled

even when the EN pin is unconnected and helps

eliminate external components that are otherwise

required to pull down the EN input.