TPS736集成电路（IC）的线性+开关稳压器规格书PDF中文资料

1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

– Device HBM ESD classification level 2

– Device CDM ESD classification level C4B

• Stable with no output capacitor or any value or

type of capacitor

• Input voltage range: 1.7V to 5.5V

• Ultra-low dropout voltage: 75mV typical

• Excellent load transient response—with or without

optional output capacitor

• New NMOS topology delivers low reverse leakage

current

• Low noise: 30μVRMS typical (10Hz to 100kHz)

• Initial accuracy: 0.5%

• 1% overall accuracy over line, load, and

temperature

• Less than 1μA maximum IQ in shutdown mode

• Thermal shutdown and specified minimum and

maximum current limit protection

• Available in multiple output voltage versions:

– Fixed outputs: 1.2V to 3.3V

– Adjustable output: 1.2V to 5.5V

2 Applications

• Infotainment

• ADAS

• Automotive clusters

• Body control modules

3 Description

The TPS736-Q1 low-dropout (LDO) linear voltage

regulator uses an NMOS topology consisting of

an NMOS pass transistor in a voltage-follower

configuration. This topology is stable using output

capacitors with low ESR, and even allows operation

without a capacitor. This topology also provides high

reverse blockage (low reverse current) and ground pin

current that is nearly constant over all values of output

current.

The TPS736-Q1 uses an advanced BiCMOS process

to yield high precision while delivering very low

dropout voltages and low ground pin current. Current

consumption, when not enabled, is under 1μA and

ideal for portable applications. The extremely low

output noise (30μVRMS with 0.1μF CNR) is ideal for

powering VCOs. This device is protected by thermal

shutdown and foldback current limit.