TPS62402

具有 1 线接口、采用 QFN 封装的双路 400mA 和 600mA、2.25MHz 降压转换器; • High Efficiency—Up to 95%\n• VIN Range From 2.5 V to 6 V\n• 2.25-MHz Fixed Frequency Operation\n• Output Current of 400 mA and 600 mA\n• Adjustable Output Voltage From 0.6V to VIN\n• Pin-Selectable Output Voltage Supports Simple Dynamic Voltage Scaling\n• EasyScale Optional One-Pin Serial Interface\n• Power Save Mode at Light Load Currents\n• 180° Out-of-Phase Operation\n• Output Voltage Accuracy in PWM Mode ±1%\n• Typical 32-µA Quiescent Current for Both Converters\n• 100% Duty Cycle for Lowest Dropout\n• Available in a 10-Pin VSON (3 mm × 3 mm)\n• APPLICATIONS\n - Cell Phones, Smart Phones\n• PDAs, Pocket PCs\n• OMAP and Low-Power DSP Supply\n• Portable Media Players\n• Digital Radios\n• Digital Cameras\n All other trademarks are the property of their respective owners;

The TPS6240x family of devices are synchronous dual step-down DC-DC converters optimized for battery-powered portable applications. The devices provide two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The devices are also suitable to operate from a standard 3.3-V or 5-V voltage rail.\n With an input voltage range from 2.5 V to 6 V, the TPS62400 is ideal to power portable applications like smart phones, PDAs, and other portable equipment.\n With the EasyScale serial interface the output voltages can be modified during operation. The fixed output voltage versions TPS62401, TPS62402, TPS62403, and TPS62404 support one-pin controlled simple Dynamic Voltage Scaling for low-power processors.\n The TPS6240x operates at a 2.25-MHz fixed switching frequency and enters the power save mode operation at light load currents to maintain high efficiency over the entire load current range. For low noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin high. In the shutdown mode, the current consumption is reduced to 1.2 µA, typical. The devices allow the use of small inductors and capacitors to achieve a small solution size.\n The TPS62400 is available in a 10-pin leadless package (3-mm × 3-mm VSON)\n\n

TPS62402

2.25MHz 400mA/600mA Dual Step-Down Converter In Small 3x3mm QFN Package

TPS62402

2.25MHz 400mA/600mA Dual Step-Down Converter In Small 3x3mm QFN Package

TPS62402

2.25MHz 400mA/600mA Dual Step-Down Converter In Small 3x3mm QFN Package

TPS62402

2.25-MHz 400-mA/600-mA DUAL STEP-DOWN CONVERTER

TPS62402

2.25-MHz 400-mA and 600-mA Dual Step-Down Converter

TPS62402

2.25MHz 400mA/600mA Dual Step-Down Converter In Small 3x3mm QFN Package

TPS62402-Q1

具有单总线接口的汽车类、双通道、固定输出电压、400mA 和 600mA、2.25MHz 降压转换器; • Qualified for automotive applications\n• AEC-Q100 qualified with the following results: \n• Device temperature grade 1: –40°C to 125°C operating junction temperature range \n• Device HBM ESD classification level H2\n• Device CDM ESD classification level C4B\n \n• High efficiency—up to 95%\n• VIN Range from 2.5 V to 6 V\n• 2.25-MHz Fixed-frequency operation\n• Output current 400 mA and 600 mA\n• Adjustable output voltage from 0.6 V to VIN \n• Pin selectable output voltage supports simple dynamic voltage scaling\n• EasyScale™ optional one-pin serial interface\n• Power-save mode at light load currents\n• 180° Out-of-phase operation\n• Output-voltage accuracy in PWM mode ±1%\n• Typical 32-µA quiescent current for both converters\n• 100% Duty cycle for lowest dropout;

The TPS6240x-Q1 family of devices are synchronous dual step-down DC-DC converters optimized for battery-powered portable applications and automotive systems. They provide two independent output voltage rails powered by rechargeable batteries or standard 3.3-V or 5-V voltage rail.\n\nThe EasyScale™ serial interface allows output-voltages modification during operation. The fixed-output-voltage versions, TPS62402-Q1, TPS62404-Q1, and TPS62405-Q1 support one-pin-controlled simple dynamic voltage scaling for low-power processors.\n\nThe TPS6240x-Q1 operates at 2.25-MHz fixed switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load-current range. For low-noise applications, one can force the devices into fixed-frequency PWM mode by pulling the MODE/DATA pin high. The shutdown mode reduces the current consumption to 1.2-µA, typical. The devices allow the use of small inductors and capacitors to achieve a small solution size.

TPS62402DRC

丝印：BYH；Package：QFN-10；2.25MHz 400mA/600mA Dual Step-Down Converter In Small 3x3mm QFN Package

TPS62402DRC

丝印：BYH；Package：QFN-10；2.25MHz 400mA/600mA Dual Step-Down Converter In Small 3x3mm QFN Package