TPS62354中文资料具有 I2C 用于动态电压调节的 1A、3MHz 降压转换器数据手册TI规格书

描述 Description

The TPS6235x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6235x supports up to 800-mA load current and allows the use of small, low cost inductors and capacitors.
The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I2C interface down to 0.6 V, the device supports low-voltage DSPs and processors core power supplies in smart-phones, PDAs, and handheld computers.
The TPS6235x operates at 3-MHz fixed switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 2 µA.
The serial interface is compatible with Fast/Standard and High-Speed mode I2C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5 mV, for reprogramming the mode of operation (Light PFM, Fast PFM or Forced PWM) or disable/enabling the output voltage.

特性 Features

• 88% Efficiency at 3-MHz Operation
• 3-MHz Fixed Frequency Operation
• Complete 1-mm Component Profile Solution
• 35-ns Minimum On-Time
• Transient Optimized Power-Save Mode (Fast PFM)
• I2C Compatible Interface up to 3.4 Mbps
• Synchronizable On the Fly to External Clock Signal
• APPLICATIONS
• Split Supply DSPs and µP Solutions OMAP™, XSCALE™
• PDAs, Pocket PCs
• Micro DC-DC Converter Modules
NanoFree, SmartReflex, OMAP, PowerPAD Is a trademark of Texas Instruments. XSCALE is a trademark of Intel Corporation. I2C is a trademark of Philips Corporation.