TPS62262

采用 2x2mm SON/TSOT23 封装的 2.25MHz 600mA 降压转换器; • High Efficiency Step-Down Converter\n• Output Current up to 600 mA\n• VIN Range from 2 V to 6 V for Li-ion Batteries with Extended Voltage Range\n• 2.25-MHz Fixed Frequency Operation\n• Power Save Mode at Light Load Currents\n• Output Voltage Accuracy in PWM Mode ±1.5%\n• Typical 15-µA Quiescent Current\n• 100% Duty Cycle for Lowest Dropout\n• Voltage Positioning at Light Loads\n• Available in a SOT (5) and 2-mm × 2-mm × 0.8- mm WSON (6) Package\n• Allows \nAll other trademarks are the property of their respective owners;

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.\n With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.\n The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.\n The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.\n The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.\n\n

TPS62262

2.25 MHz 600 mA Step Down Converter in 2x2SON/TSOT-23 Package

TPS62262

2.25 MHz 600 mA Step Down Converter in 2x2SON/TSOT-23 Package

TPS62262

2.25-MHz 600-mA STEP-DOWN CONVERTERS

TPS62262

2.25 MHz 600 mA Step Down Converter in 2x2 QFN / TSOT-23 Package

TPS62262-Q1

具有 1.2V 固定输出电压的汽车类 2V 至 6V、2.25MHz 固定频率 600mA 降压转换器; • Qualified for Automotive Applications\n• High-Efficiency Step-Down Converter\n• Output Current up to 600 mA\n• Wide VIN Range from 2-V to 6-V for Li-Ion Batteries with Extended Voltage Range \n• 2.25-MHz Fixed Frequency Operation\n• Power Save Mode at Light Load Currents\n• Output Voltage Accuracy in PWM Mode ±1.5%\n• 15-µA (Typ) Quiescent Current\n• 100% Duty Cycle for Lowest Dropout\n• Soft Start\n• Voltage Positioning at Light Loads\n• Available in a Small 2×2×0,8-mm SON Package\n• Allows;

The TPS6226x devices are high-efficiency synchronous step-down dc-dc converters optimized for battery powered applications. It provides up to 600-mA output current from a single Li-Ion cell and is ideal to power mobile phones and other portable applications. With an wide input voltage range of 2 V to 6 V, the device supports applications powered by Li-Ion batteries with extended voltage range, two and three cell alkaline batteries, 3.3-V and 5-V input voltage rails.The TPS6226x operates at 2.25-MHz fixed switching frequency and enters Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. The Power Save Mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.The TPS6226x is available in a very small 2×2mm 6-pin SON package.

TPS62262DDCR

2.25 MHz 600 mA Step Down Converter in 2x2 QFN / TSOT-23 Package

TPS62262DDCT

2.25 MHz 600 mA Step Down Converter in 2x2 QFN / TSOT-23 Package

TPS62262DRV

2.25 MHz 600 mA Step Down Converter in 2x2SON/TSOT-23 Package

TPS62262DRVR

2.25 MHz 600 mA Step Down Converter in 2x2SON/TSOT-23 Package