TPS6208X中文资料德州仪器数据手册PDF规格书

1 Features

• DCS-Control™ topology

• Up to 95% efficiency

• Hiccup short-circuit protection

• Power save mode for light load efficiency

• 100% duty cycle for lowest dropout

• 2.5-V to 6.0-V input voltage range

• 17-μA operating quiescent current

• 0.8-V to VIN adjustable output voltage

• 1.8-V and 3.3-V fixed output voltage

• Output discharge

• Power good output

• Thermal shutdown protection

• Available in 2-mm × 2-mm VSON package

• Create a custom design using the:

– TPS62085 WEBENCH® Power Designer

– TPS62086 WEBENCH® Power Designer

– TPS62087 WEBENCH® Power Designer

2 Applications

• Battery-powered applications

• Point-of-load

• Processor supplies

• Hard disk drives

3 Description

The TPS62085, TPS62086, and TPS62087 devices

are high-frequency synchronous step-down

converters optimized for small solution size and high

efficiency. With an input voltage range of 2.5 V to

6.0 V, common battery technologies are supported.

The devices focus on high-efficiency step-down

conversion over a wide output current range. At

medium to heavy loads, the converter operates in

PWM mode and automatically enters Power Save

Mode operation at light load to maintain high

efficiency over the entire load current range.

To address the requirements of system power rails,

the internal compensation circuit allows a large

selection of external output capacitor values ranging

from 10 μF to 150 μF. Together with its DCS-Control

architecture, excellent load transient performance and

output voltage regulation accuracy are achieved. The

devices are available in a 2-mm × 2-mm VSON

package.