TPS62020中文资料可调节、600mA、效率为 95% 的降压转换器，18uA，MSOP-10数据手册TI规格书

描述 Description

The TPS6202x is a high efficiency synchronous step-down dc-dc converter optimized for battery powered portable applications. This device is ideal for portable applications powered by a single Li-Ion battery cell or by 3-cell NiMH/NiCd batteries. With an output voltage range from 6.0 V down to 0.7 V, the device supports low voltage DSPs and processors in PDAs, pocket PCs, as well as notebooks and subnotebook computers. The TPS6202x operates at a fixed switching frequency of 1.25 MHz and enters the power save mode operation at light load currents to maintain high efficiency over the entire load current range. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. The difference between the TPS6202x and the TPS62021 is the logic level of the MODE pin. The TPS62021 has an active-low MODE\\ pin. The TPS6202x supports up to 600-mA load current.

特性 Features

• Up to 95% Conversion Efficiency
• Load Current: 600 mA
• Switching Frequency: 1.25 MHz
• Power Save Mode Operation at Light load Currents
• 100% Duty Cycle for Lowest Dropout
• Dynamic Output Voltage Positioning
• Short-Circuit Protection
• 10 Pin QFN 3 x 3 mm Package
• PDA, Pocket PC and Smart Phones
• CPUs and DSPs
• xDSL Applications
• Standard 5-V to 3.3-V Conversion

PowerPAD is a trademark of Texas Instruments.