TPS544C20RVFTG4.A中文资料德州仪器数据手册PDF规格书

1 Features

1• PMBus-Enabled Converters: 20 A, 30 A

• 4.5-V to 18-V input, 0.6-V to 5.5-V Output

• 5 mm × 7 mm LQFN Package with 0.5-mm Pitch

• Single Thermal Pad

• Integrated 4.5-mΩ and 2.0-mΩ Stacked

NexFET™ Power Stage

• 600-mV, 0.5% Reference

• Lossless, Low-Side MOSFET Current Sensing

• Selectable D-CAP™ and D-CAP2™ Mode Control

• Differential Remote Sensing

• Monotonic Start-Up into Pre-Biased Output

• Output Voltage Margin and Trim

• Output Voltage and Output Current Reporting

• External Temperature Monitoring with 2N3904

• Programmable via PMBus

– Overcurrent Protection

– UVLO, Soft-Start

– PGOOD, OV, UV, OT Levels

– Fault Responses

– Turn-On and Turn-Off Delays

• Thermal Shutdown

• Pin Compatible 20-A, 30-A Converters

2 Applications

• Test and Instrumentation

• Ethernet Switches, Optical Switches, Routers,

Base Stations

• Servers

• Enterprise Storage SSD

• High-Density Power Solutions

3 Description

The TPS544B20 and TPS544C20 devices are

PMBus compatible, non-isolated DC-DC Integrated

FET converters, capable of high-frequency operation

and delivering 20-A , or 30-A current output from a

5 mm × 7 mm package, enabling high-power density

and fast transient performance with minimal PCB

area. The PMBus interface provides for converter

configuration as well as monitoring of key parameters

including output voltage, current and an optional

external temperature. High-frequency, low-loss

switching, provided by an integrated NexFET power

stage and optimized drivers, allows for very highdensity

power solutions and reduced inductor and

filter capacitor sizes. Response to fault conditions can

be set to either restart or latch off depending on

system requirements.