TPS53679中文资料具有 NVM 和 PMBus 的双通道 6+1/5+2 VR13 D-CAP+™ 降压多相控制器数据手册TI规格书

描述 Description

The TPS53679 is a fully VR13 SVID compliant step-down controller with dual channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET ™power stage. Advanced control features such as D-CAP+™ architecture with undershoot reduction (USR) provide fast transient response, low output capacitance, and good current sharing. The device also provides novel phase interleaving strategy and dynamic phase shedding for efficiency improvement at different loads. Adjustable control of VCORE slew rate and voltage positioning round out the Intel® VR13™ features. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the systems. All programmable parameters can be configured by the PMBus interface and can be stored in NVM as the new default values to minimize the external component count.

The TPS53679 device if offered in a thermally enhanced -pin QFN packaged and is rated to operate from –40°C to 125°C.

特性 Features

• Intel VR13 Serial VID (SVID) Compliant
• Programmable Loop Compensations
• Individual Phase Current Calibrations and Reports
• Fast Phase-Adding for Undershoot Reduction (USR)
• 8-Bit DAC with Selectable 5 mV or 10 mV Resolution and Output Ranges from 0.25 V to 1.52 V or 0.5 to 2.8125 V for Dual Channels
• Fully Compatible with TI NextFET™ Power Stage for High-Density Solutions
• Patented AutoBalance™ Phase Balancing
• PMBus™ System Interface for Telemetry of Voltage, Current, Power, Temperature, and Fault Conditions
• Conversion Voltage Range: 4.5 V to 17 V
• Low Quiescent Current

简介

TPS53679属于集成电路（IC）的特殊用途稳压器。由TI制造生产的TPS53679特殊用途稳压器该系列产品用于电源控制、某种形式的转换，适用于特定的复杂应用。因此，各种产品特性集差异较大，包括空燃比传感器接口、汽车交流发电机电压调节、DDR 端接、液体透镜控制、摩托车转向信号控制、热电 (peltier) 冷却器控制、压电触觉控制、阀门控制、小型发动机管理等。