TPS53310中文资料具有集成 MOSFET 的 2.9V 至 6V、3A 降压转换器数据手册TI规格书

描述 Description

The TPS53310 provides a fully integrated 3-V to 5-V VIN integrated synchronous FET converter solution with 16 total components, in 200 mm2 of PCB area. Due to the low RDS(on) and TI's proprietary SmoothPWM™ Skip mode of operation, it enables 95.5% peak efficiency, and over 90% efficiency at loads as light as 100 mA. It requires only two 22-µF ceramic output capacitors for a power dense 3-A solution.
The TPS53310 features a 1.1-MHz switching frequency, SKIP mode operation support, pre-bias startup, internal softstart, output soft discharge, internal VBST switch, power good, EN/input UVLO, overcurrent, overvoltage, undervoltage and overtemperature protections and all ceramic output capacitor support. It supports supply voltage from 2.9 V to 3.5 V and conversion voltage from 2.9 V to 6 V, and output voltage is adjustable from 0.6 V to 0.84 V × VIN.
The TPS53310 is available in the 3 mm × 3 mm, 16-pin VQFN package (Green RoHs compliant and Pb free) and operates between –40°C and 85°C.

特性 Features

• >95% Maximum Efficiency
• Continuous 3-A Output Current
• Hiccup Overcurrent Protection
• Supports All MLCC Output Capacitor
• SmoothPWM Auto-Skip Eco-mode for Light-Load Efficiency
• Voltage Mode Control
• Supports Master-Slave Interleaved Operation
• Synchronization up to ±20% of Nominal Frequency
• Conversion Voltage Range Between 2.9 V and 6 V
• Soft-Stop Output Discharge During Disable
• Adjustable Output Voltage Ranging Between 0.6 V and 0.84 V × VIN
• Undervoltage, Overvoltage and Overtemperature Protection
• Small 3 mm × 3 mm, 16-Pin VQFN Package
• Open-Drain Power Good Indication
• Internal Boot Strap Switch
• Low RDS(on), 24 mΩ with 3.3-V Input and 19-mΩ with 5-V Input
• Supports Pre-bias Start Up

简介

TPS53310属于集成电路（IC）的DCDC开关稳压器。由TI制造生产的TPS53310稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。