TPS53128中文资料4.5V 至 24V 同步双路 D-CAP2 降压控制器数据手册TI规格书

描述 Description

The TPS53128 is a dual, adaptive on-time D-CAP2 mode synchronous buck controller. The part enables system designers to cost effectively complete the suite of various end equipment's power bus regulators with a low external component count and low standby consumption. The main control loop for the TPS53128 uses the D-CAP2 Mode topology which provides a very fast transient response with no external component.The TPS53128 also has a proprietary circuit that enables the device to adapt not only low equivalent series resistance (ESR) output capacitors such as POSCAP/SP-CAP, but also ceramic capacitor. The fixed frequency emulated adaptive on-time control supports seamless operation between PWM mode at heavy load condition and reduced frequency operation at light load for high efficiency down to milliampere range. The part provides a convenient and efficient operation with conversion voltages from 4.5 V to 24 V and output voltage from 0.76 V to 5.5 V. The TPS53128 is available in 4-mm x 4-mm 24 pin QFN (RGE) or 24 pin TSSOP (PW) packages, and is specified from –40°C to 85°C ambient temperature range.

特性 Features

• D-CAP2 Mode™ Control
• No External Parts Required for Loop Compensation
• High Initial Reference Accuracy (±1%)
• Wide Input Voltage Range: 4.5 V to 24 V
• Low-Side RDS(ON) Loss-Less Current Sensing
• Adjustable Soft Start
• 350-kHz Switching Frequency
• 30-mV to 300-mV OCP Threshold Voltage
• Auto-Skip Eco-mode for High Efficiency at Light Load
• Point-of-Load Regulation in Low Power Systems for Wide Range of Applications
• Networking Home Terminal
• DVD Player/Recorder
• Gaming Consoles