TPS51211DSCR集成电路（IC）的特殊用途稳压器规格书PDF中文资料

TPS51211DSCR属于集成电路（IC）的特殊用途稳压器。由德州仪器制造生产的TPS51211DSCR特殊用途稳压器该系列产品用于电源控制、某种形式的转换，适用于特定的复杂应用。因此，各种产品特性集差异较大，包括空燃比传感器接口、汽车交流发电机电压调节、DDR 端接、液体透镜控制、摩托车转向信号控制、热电 (peltier) 冷却器控制、压电触觉控制、阀门控制、小型发动机管理等。

1FEATURES

2• Wide Input Voltage Range: 3 V to 28 V

• Output Voltage Range: 0.7 V to 2.6 V

• Wide Output Load Range: 0 to 20A+

• Built-in 0.5% 0.7 V Reference

• 290-kHz, Adaptive On-Time D-CAP™ MODE

Control

• 4700 ppm/°C RDS(on) Current Sensing

• Internal 1-ms Voltage Servo Soft-start

• Pre-Charged Start-up Capability

• Built in Output Discharge

• Power Good Output

• Integrated Boost Switch

• Built-in OVP/UVP/OCP

• Thermal Shutdown (Non-latch)

• SON-10 (DSC) Package

APPLICATIONS

• Notebook Computers

• I/O Supplies

• System Power Supplies

DESCRIPTION

The TPS51211 is a small-sized single buck controller

with adaptive on-time D-CAP™ mode. The device is

suitable for low output voltage, high current, PC

system power rail and similar point-of-load (POL)

power supply in digital consumer products. A small

package with minimal pin-count saves space on the

PCB, while a dedicated EN pin and pre-set frequency

minimize design effort required for new designs. The

skip-mode at light load condition, strong gate drivers

and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range.

The conversion input voltage which is the high-side

FET drain voltage ranges from 3 V to 28 V and the

output voltage ranges from 0.7 V to 2.6 V. The device

requires an external 5-V supply. The TPS51211 is

available in a 10-pin SON package specified from

–40°C to 85°C.