TPS40002中文资料低输入 (2.25V-5.5V) 600kHz 频率、同步降压控制器，仅用作源控制器数据手册TI规格书

描述 Description

The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.

The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor connected to the SS/SD pin. The SS/SD pin is also used for shutdown.

特性 Features

• Operating Input Voltage 2.25 V to 5.5 V
• 1% Internal 0.7 V Reference
• Externally Adjustable Soft-Start and Overcurrent Limit
• Versions for Starting into VOUT Pre-Bias
• Thermal Shutdown
• Fixed-Frequency, Voltage-Mode Control
• TPS40002/3/5 600-kHz
• APPLICATIONS
• Telecom Equipment
• Servers
• Power Modules

PowerPAD™ and Predictive Gate Drive™ are trademarks of Texas Instruments Incorporated.