TPS3870J4330DSERQ1集成电路（IC）的监控器规格书PDF中文资料

TPS3870J4330DSERQ1属于集成电路（IC）的监控器。由德州仪器制造生产的TPS3870J4330DSERQ1监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。

1 Features

1• Qualified for automotive applications

• AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature

– Device HBM ESD classification level 2

– Device CDM ESD classification level C7B

• Input voltage range: 1.7 V to 5.5 V

• Undervoltage lockout (UVLO): 1.7 V

• Low quiescent current: 7 μA (Max)

• High threshold accuracy:

– ± 0.25% (typical)

– ± 0.7% (–40°C to +125°C)

• Fixed threshold levels

– 50-mV steps from 500 mV to 1.3 V

– 1.5 V, 1.8 V, 2.5 V, 2.8 V, 2.9 V 3.3 V, 5 V

• User adjustable voltage threshold levels

• Internal glitch immunity and hysteresis

• Tolerance available from 3% to 7% in 1% steps

• Fixed time delay options: 50 μs, 1 ms, 5 ms, 10

ms, 20 ms, 100 ms, 200 ms

• Programmable time delay option with a single

external capacitor

• Open-drain active low OV monitor

• RESET voltage latching output mode

2 Applications

• Advanced driver assistance system (ADAS)

• Camera

• Sensor fusion

• HEV/EV

• FPGA, ASIC and DSP based systems

3 Description

The TPS3870-Q1 device is an integrated overvoltage

(OV) monitor or reset IC in industry’s smallest 6-pin

DSE package. This highly accurate voltage

supervisor is ideal for systems that operate on lowvoltage

supply rails and have narrow margin supply

tolerances. Low threshold hysteresis prevent false

reset signals when the monitored voltage supply is in

its normal range of operation. Internal glitch immunity

and noise filters further eliminate false resets

resulting from erroneous signals.

The TPS3870-Q1 does not require any external

resistors for setting overvoltage reset thresholds,

which further optimizes overall accuracy, cost,

solution size, and improves reliability for safety

systems. The Capacitor Time (CT) pin is used to

select between the two available reset time delays

designed into each device and also to adjust the

reset time delay by connecting a capacitor. A

separate SENSE input pin and VDD pin allow for the

redundancy sought by high-reliability systems.

This device has a low typical quiescent current

specification of 4.5 μA (typical). The TPS3870-Q1 is

suitable for automotive applications and is qualified

for AEC-Q100 Grade 1.