TPS3760E012DYYRQ1集成电路（IC）的监控器规格书PDF中文资料

TPS3760E012DYYRQ1属于集成电路（IC）的监控器。由德州仪器制造生产的TPS3760E012DYYRQ1监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。

1 Features

• AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature TA

– Device HBM ESD classification level 2

– Device CDM ESD classification level C7B

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• Wide supply voltage range: 2.7 V to 65 V

• SENSE and RESET pins are 65 V graded

• Low quiescent current: 1 μA (typical)

• Flexible and wide voltage threshold options

Table 10-1

– 2.7 V to 36 V (1.5 maximum accuracy)

– 800 mV option (1 maximum accuracy)

• Built-in hysteresis (VHYS)

– Percentage options: 2 to 13 (1 steps)

– Fixed options: VTH < 8 V = 0.5 V, 1 V, 1.5 V,

2 V, 2.5 V

• Programmable reset time delay

– 10 nF = 12.8 ms, 10 μF = 12.8 s

• Programmable sense time delay

– 10 nF = 1.28 ms, 10 μF = 1.28 s

• Manual Reset (MR) feature

• Output reset latching feature

• Output topology: Open-Drain or Push-Pull

2 Applications

• Telematics control unit

• Emergency call system

• Audio amplifier

• Head unit and cluster

• Sensor fusion and cameras

• Body control module

3 Description

The TPS3760-Q1 is a 65 V input voltage detector with

1 μA IDD and 1 accuracy, and a fast detection time.

This device can be connected directly to 12 V / 24 V

automotive battery system for continuous monitoring

of over (OV) or under (UV) voltage conditions; with

its internal resistor divider, it offers the smallest total

solution size. Wide hysteresis voltage options are

available to ignore cold crank, start-stop and various

car battery voltage transients. Built-in hysteresis on

the SENSE pin prevents false reset signals when

monitoring a supply voltage rail.

The separate VDD and SENSE pins allow

redundancy sought by high-reliability automotive

systems and SENSE can monitor higher and lower

voltages than VDD. Optional use of external resistors

are supported by the high impedance input of

the SENSE pin. CTS and CTR pins allow delay

adjustability on the rising and falling edges of the

RESET signals. Also, CTS functions as a debouncer

by ignoring voltage glitches on the monitored voltage

rails; CTR operates as a manual reset (MR) that can

be used to force a system reset.

The TPS3760 is available in a 4.1-mm×1.9-mm SOT

14-pin package. TPS3760 operates over –40°C to

+125°C TA.