TPS2834数据手册集成电路（IC）的栅极驱动器规格书PDF

描述 Description

The TPS2834 and TPS2835 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not include on-chip MOSFET drivers. The drivers are designed to deliver minimum 2-A peak currents into large capacitive loads. The high-side driver can be configured as ground-reference or as floating-bootstrap. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, and provides high efficiency for the buck regulator. The TPS2834 and TPS2835 have additional control functions: ENABLE, SYNC, and CROWBAR. Both high-side and low-side drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver disabling the low-side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for overvoltage protection against faulted high-side power FETs.

The TPS2834 has a noninverting input, while the TPS2835 has an inverting input. These drivers are available n 14-terminal SOIC and thermally enhanced TSSOP PowerPAD™ packages and operate over a junction temperature range of –40°C to 125°C.

特性 Features

• Floating Bootstrap or Ground-Reference High-Side Driver
• Adaptive Dead-Time Control
• 50-ns Max Rise/Fall Times With 3.3-nF Load
• 2.4-A Typical Output Current
• 4.5-V to 15-V Supply Voltage Range
• TTL-Compatible Inputs
• Internal Schottky Bootstrap Diode
• SYNC Control for Synchronous or Nonsynchronous Operation
• CROWBAR for OVP, Protects Against Faulted High-Side Power FETs
• Low Supply Current....3 mA Typical
• Ideal for High-Current Single or Multiphase Power Supplies
• –40°C to 125°C Operating Virtual Junction Temperature Range
• Available in SOIC and TSSOP PowerPAD Packages
PowerPAD is a trademark of Texas Instruments Incorporated.