TPS2830中文资料具有 CMOS 输入和使能功能、用于同相同步降压的 2.4A、28V 半桥栅极驱动器数据手册TI规格书

描述 Description

The TPS2830 and TPS2831 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not have MOSFET drivers. The drivers are designed to deliver 2.4-A peak currents into large capacitive loads. The high-side driver can be configured as a ground-reference driver or as a floating bootstrap driver. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, providing higher efficiency for the buck regulator. The TPS2830/31 drivers have additional control functions: ENABLE, SYNC, and CROWBAR. Both drivers are off when ENABLE is low. The driver is configured as a nonsynchronous-buck driver, disabling the low side driver when SYNC is low. The CROWBAR function turns on the low-side power FET, overriding the IN signal, for over-voltage protection against faulted high-side power FETs. The TPS2830 has a noninverting input. The TPS2831 has an inverting input. The TPS2830/31 drivers are available in 14-terminal SOIC and thermally-enhanced TSSOP PowerPADE packages, and operate over a virtual junction temperature range of \\x9640°C to 125°C.

特性 Features

• Floating Bootstrap or Ground-Reference High-Side Driver
• 50-ns Max Rise/Fall Times and 100-ns Max Propagation Delay \\x96 3.3-nF Load
• 2.4-A Typical Peak Output Current
• Internal Schottky Bootstrap Diode
• CROWBAR for OVP, Protects Against Faulted High-Side Power FETs
• \\x9640°C to 125°C Operating Virtual Junction Temperature Range
• Available in SOIC and TSSOP PowerPAD Packages
PowerPAD is a trademark of Texas Instruments Incorporated.