TPS281C100B中文资料德州仪器数据手册PDF规格书

1 Features

• Wide operating voltage range: 6 V to 60 V

• Low RON: 83-mΩ typ, 168-mΩ max

• Improve system level reliability through adjustable

current limiting

– 1 A to 5 A (fixed 0.5 A)

• Accurate current sensing

– ±4% at 1 A in standard sense mode

– ±12.5% at 4 mA in high accuracy sense mode

• Integrated inductive discharge clamp > 64 V

• Low quiescent current (Iq) of < 1.5 mA

• Operating junction temperature: –40 to 125°C

• Input control: 1.8-V, 3.3-V, and 5-V logic

compatible

• Integrated fault sense voltage scaling for ADC

protection

• Open-load detection in off-state

• Thermal shutdown and swing detection

• Enhanced electrical fast transient (EFT) according

to IEC61000-4-4

– Device stays OFF with 22-nF output

capacitance, ±2-kV EFT with DIAG_EN low

• 14-pin thermally-enhanced TSSOP package

• 12-pin thermally-enhanced WSON package

2 Applications

• Digital output module

• Safe torque off (STO)

• Holding brake

• General resistive, inductive, and capacitive loads

3 Description

TPS281C100 is a single channel smart high-side

switch designed to meet the requirements of industrial

control systems. The low RON minimizes device power

dissipation, driving a wide range of output load current

up to 60-V DC operation range improves system

robustness.

The device integrates protection features such as

thermal shut down, output clamp, and current limit.

These features improve system robustness during

fault events such as short circuit. TPS281C100

implements an adjustable current limiting circuit that

improves the reliability of the system by reducing

inrush current when driving large capacitive loads

and minimizing overload current. In order to drive

high inrush current loads such as lamps or fast

charging capacitive loads, TPS281C100A implements

an inrush current time period with a higher level of

allowed current. The device also provides an accurate

load current sense that allows for improved load

diagnostics such as overload and open-load detection

enabling better predictive maintenance.

TPS281C100 is available in a small 14-pin, 4.4-mm

× 5-mm HTSSOP leaded package with 0.65-mm pin

pitch and 12-pin, 4-mm × 4-mm WSON with 0.5-mm

pin pitch minimizing the PCB footprint.