TPS27S100BPWPT.A中文资料德州仪器数据手册PDF规格书

1 Features

1• 80-mΩ Single-channel High-side switch with full

diagnostics

– TPS27S100A: Open-drain status output

– TPS27S100B: Current monitor analog output

• Wide operating voltage 3.5 V to 40 V

• Very-low standby current, <0.5 μA

• Operating junction temperature, –40 to 150°C

• Input control, 3.3-V and 5-V logic compatible

• High-accuracy current monitor, ±30 mA at 1 A

• Adjustable current limit (0.5-A to 6-A) with external

resistor, ±20% at 0.5 A

• Diagnostic enable function for multiplexing of

MCU, analog or digital interface

• Excellent ESD protection on IN and OUT pins

– ±16 kV IEC 61000-4-2 ESD contact discharge

– ±4 kV IEC 61000-4-4 Electrical fast transient

– ±1.0 kV/42 Ω IEC 61000-4-5 Surge

• Protection

– Overload and short-circuit-to-GND protection

– Inductive load negative voltage clamp

– Undervoltage lockout (UVLO) protection

– Thermal shutdown and swing with self

recovery

– Loss of GND protection

• Diagnostic

– On- and Off-State output Open-Load / short to

supply detection

– Overload and short to ground detection

– Thermal shutdown and swing detection

• Thermally-Enhanced 14-Pin PWP or 16-Pin QFN

package

2 Applications

• Programmable logic controller

• Building automation

• Telecom/networks

3 Description

The TPS27S100x is a single-channel, fully-protected,

high-side switch with an integrated NMOS and charge

pump. Full diagnostics and high-accuracy currentmonitor

features enable intelligent control of the load.

An adjustable current-limit function greatly improves

the reliability of the whole system. The device

diagnostic reporting has two versions to support both

digital fault status and analog current monitor output.

Accurate current monitor and adjustable current limit

features differentiate it from the market.