TPS25762-Q1 Automotive USB Type-C® Power Delivery Controller with Buck-Boost Regulator

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD classification level 2 – Device CDM ESD classification level C2b – Enhanced connector pin ESD protection • USB Power Delivery (PD) c

文件：10.62002 Mbytes 页数：88 Pages

TI

德州仪器

TPS25772-Q1 Automotive Dual USB Type-C® Power Delivery Controller with Buck- Boost Regulator

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C2b – Enhanced connector pin ESD protection • USB Power Delivery® (PD)

文件：10.66503 Mbytes 页数：90 Pages

TI

德州仪器

TPS25772-Q1 Automotive Dual USB Type-C® Power Delivery Controller with Buck- Boost Regulator

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD classification level 2 – Device CDM ESD classification level C2b – Enhanced connector pin ESD protection • USB Power Delivery (PD) c

文件：11.64123 Mbytes 页数：94 Pages

TI

德州仪器

TPS25762-Q1 Automotive USB Type-C® Power Delivery Controller with Buck-Boost Regulator

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD classification level 2 – Device CDM ESD classification level C2b – Enhanced connector pin ESD protection • USB Power Delivery (PD) c

文件：11.5928 Mbytes 页数：93 Pages

TI

德州仪器

TPS25763-Q1 Automotive USB Type-C® Power Delivery Controller with Buck-Boost Regulator and DisplayPort™ Alternate Mode over USB-C®

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD classification level 2 – Device CDM ESD classification level C2b – Enhanced connector pin ESD protection • USB power delivery (PD) c

文件：11.21213 Mbytes 页数：88 Pages

TI

德州仪器

TPS25772-Q1 Automotive Dual USB Type-C Power Delivery Controller with Buck-Boost Regulator

文件：454.34 Kbytes 页数：7 Pages

TI

德州仪器

具有降压/升压稳压器和智能电源管理功能的汽车类双路 USB Type-C® PD 控制器

TPS257xx-Q1 是一款 USB Type-C PD 和 BC1.2 双充电端口控制器，适用于包含“仅充电”和“充电以及 USB 2.0 或 3.0 数据传输”的汽车双端口 USB 应用。功能包括：一个 ARM Cortex M0™；带 Type-C 电缆插拔和方向检测的 USB 端口控制器；USB 电池充电规范版本 1.2 (BC1.2) 检测；USB 端点 PHY；器件电源管理和监控电路；连接器引脚过压和短路保护；以及集成式降压/升压转换器。\n\n满 60W 输出功率可在以下条件下达到：6.8V ≤ VIN ≤ 18V，环境温度 (TA) 最高为 70°C。一个智能的系统策略管理器 • 具有符合 AEC-Q100 标准的下列特性： \n• 器件 HBM ESD 分类等级 2\n• 增强型连接器引脚 ESD 保护功能\n• 具有可编程电源 (PPS) 支持的 USB 电力传输 (PD) 控制器 \n• USB PD 输出功率高达 60W 的集成式降压/升压电源\n• IBUS 输出：± 50mA 电流限制步长 \n• 最高 3A，11V ≤ VBUS ≤ 21V\n• VBUS 短接 VBAT 和接地保护\n• 具有抖动功能的同步输入/输出\n• USB 端口配置选项 \n• 1 USB-PD 端口和 1 USB-C 端口 (TPS25766-Q1)\n• 符合 USB 要;

TI

德州仪器

TPS25772-Q1 Automotive Dual USB Type-C® Power Delivery Controller with Buck- Boost Regulator

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C2b – Enhanced connector pin ESD protection • USB Power Delivery® (PD)

文件：10.66503 Mbytes 页数：90 Pages

TI

德州仪器

TPS25772-Q1 Automotive Dual USB Type-C® Power Delivery Controller with Buck- Boost Regulator

1 Features • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD classification level 2 – Device CDM ESD classification level C2b – Enhanced connector pin ESD protection • USB Power Delivery (PD) c

文件：11.64123 Mbytes 页数：94 Pages

TI

德州仪器