TPS2370数据手册集成电路（IC）的专用规格书PDF

描述 Description

Acting as an interface between the Power Source Equipment (PSE) and the Powered Device (PD), the TPS2370 performs all detection, classification, inrush current limiting, and switch FET control that is necessary for compliance with the IEEE 802.3af Standard. An internal 0.3- FET provides maximum power delivery. As an additional feature, the TPS2370 interfaces with the enable/soft-start signal of a dc-to-dc converter, eliminating the need to have an accurate UVLO in the dc-to-dc converter.

At low-input voltages (1.8 V to 10 V), the TPS2370 draws less than 12 µA, allowing accurate sensing of the external 24.9-k discovery resistor. At input voltages between 15 V and 20 V, an external resistor sets the level of current to be drawn during classification mode. TPS2370 is compatible with current as well as voltage measurement schemes for classification. Above 20-V input, the classification current is shut off, reducing internal power dissipation.

The TPS2370 drives an internal low-side FET for control of the return side of the power path. The internal FET switch is turned on when the input voltage reaches 40 V and above. When the input voltage decreases, the FET remains on until the input voltage drops to below 30 V.

During initial turn-on of the switch (inrush mode), an external resistor is used to program the inrush current, allowing a wide range of capacitor values to be used at the load. According to IEEE 802.3 af specification, inrush current of 400 mA is allowed only for 50 ms, limiting the load capacitor to approximately 180 µF. A programmable inrush current limit removes this limitation, allowing a larger capacitor to be used with a lower inrush current limit.

特性 Features

• Integrated Power Interface Switch for IEEE 802.3af Powered Devices (PDs)
• Provides PD Detection Signature
• Provides PD Classification Signature (Class 0-4)
• Programmable Inrush Current Limit
• Internal 0.3- Low-Side FET
• Interfaces to DC/DC Soft-Start for DC/DC Enable
• Internal Thermal Protection — Disconnects PD Load
• Minimal External Parts Count
• 8-Pin SOIC, 8-Pin TSSOP Packages
• APPLICATIONS
• VoIP Phones
• Internet Appliances
• Wireless LAN Access Points
• Bluetooth™ Access Points

PowerPAD is a trademark of Texas Instruments. Bluetooth is a trademark of Telefonaktiebolaget LM Ericsson.