TPS201

Outdoor Twin Gang Socket

Features&Benefits 13amptwingangsocket 2xearthterminalsinbackboxforcontinuity IP55weatherproofrating(whenlidclosed) Impactresistanthousing Springbacksocketlidcovers SuitableforallBS13ampplugs

TPS2010A

5.5V、0.3A、35mΩ 负载开关; • 33-m (5-V Input) High-Side MOSFET Switch\n• Short-Circuit and Thermal Protection\n• Operating Range . . . 2.7 V to 5.5 V\n• Logic-Level Enable Input\n• Typical Rise Time. . . 6.1 ms\n• Undervoltage Lockout\n• Maximum Standby Supply Current. . . 10 µA\n• No Drain-Source Back-Gate Diode\n• Available in 8-pin SOIC and 14-Pin TSSOP Packages\n• Ambient Temperature Range, -40°C to 85°C\n• 2-kV Human-Body-Model, 200-V Machine-Model ESD Protection;

The TPS201xA family of power distribution switches is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices are 50-m N-channel MOSFET high-side power switches. The switch is controlled by a logic enable compatible with 5-V logic and 3-V logic. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. \n\nWhen the output load exceeds the current-limit threshold or a short is present, the TPS201xA limits the output current to a safe level by switching into a constant-current mode. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until valid input voltage is present.\n\n The TPS201xA devices differ only in short-circuit current threshold. The TPS2010A limits at 0.3-A load, the TPS2011 at 0.9-A load, the TPS2012A at 1.5-A load, and the TPS2013A at 2.2-A load (see Available Options). The TPS201xA is available in an 8-pin small-outline integrated-circuit (SOIC) package and in a 14-pin thin-shrink small-outline package (TSSOP) and operates over a junction temperature range of -40°C to 125°C.)

TPS2011

1.2A、2.7 到 5.5V 单路高侧 MOSFET 开关 IC，无故障报告、工作态低电平启用; • 95-m Max (5.5-V Input) High-Side MOSFET Switch With Logic Compatible Enable Input\n• Short-Circuit and Thermal Protection\n• Typical Short-Circuit Current Limits: 0.4 A, TPS2010; 1.2 A, TPS2011; 2 A, TPS2012; 2.6 A, TPS2013\n• Electrostatic-Discharge Protection, 12-kV Output, 6-kV All Other Terminals\n• Controlled Rise and Fall Times to Limit Current Surges and Minimize EMI\n• SOIC-8 Package Pin Compatible With the Popular LittlefootTM Series When GND Is Connected\n• 2.7-V to 5.5-V Operating Range\n• 10-uA Maximum Standby Current\n• Surface-Mount SOIC-8 and TSSOP-14 Packages\n• -40°C to 125°C Operating Junction Temperature Range;

The TPS201x family of power-distribution switches is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. The high-side switch is a 95-mN-channel MOSFET. Gate drive is provided by an internal driver and charge pump designed to control the power switch rise times and fall times to minimize current surges during switching. The charge pump operates at 100 kHz, requires no external components, and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short circuit is present, the TPS201x limits the output current to a safe level by switching into a constant-current mode. Continuous heavy overloads and short circuits increase power dissipation in the switch and cause the junction temperature to rise. If the junction temperature reaches approximately 180°C, a thermal protection circuit shuts the switch off to prevent damage. Recovery from thermal shutdown is automatic once the device has cooled sufficiently. The members of the TPS201x family differ only in short-circuit current threshold. The TPS2010 is designed to limit at 0.4-A load; the other members of the family limit at 1.2 A, 2 A, and 2.6 A (see the available options table). The TPS201x family is available in 8-pin small-outline integrated circuit (SOIC) and 14-pin thin shink small-outline (TSSOP) packages and operates over a junction temperature range of -40°C to 125°C. Versions in the 8-pin SOIC package are drop-in replacements for Siliconix's LittlefootTM power PMOS switches, except that GND must be connected.The D package is available taped and reeled. Add an R suffix to device type (e.g., TPS2010DR).The PW package is only available left-end taped and reeled (indicated by the LE suffix on the device type; e.g., TPS2010PWLE).

TPS2011A

5.5V、0.6A、35mΩ 负载开关; • 33-m (5-V Input) High-Side MOSFET Switch\n• Short-Circuit and Thermal Protection\n• Operating Range . . . 2.7 V to 5.5 V\n• Logic-Level Enable Input\n• Typical Rise Time. . . 6.1 ms\n• Undervoltage Lockout\n• Maximum Standby Supply Current. . . 10 µA\n• No Drain-Source Back-Gate Diode\n• Available in 8-pin SOIC and 14-Pin TSSOP Packages\n• Ambient Temperature Range, -40°C to 85°C\n• 2-kV Human-Body-Model, 200-V Machine-Model ESD Protection;

The TPS201xA family of power distribution switches is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices are 50-m N-channel MOSFET high-side power switches. The switch is controlled by a logic enable compatible with 5-V logic and 3-V logic. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. \n\nWhen the output load exceeds the current-limit threshold or a short is present, the TPS201xA limits the output current to a safe level by switching into a constant-current mode. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until valid input voltage is present.\n\n The TPS201xA devices differ only in short-circuit current threshold. The TPS2010A limits at 0.3-A load, the TPS2011 at 0.9-A load, the TPS2012A at 1.5-A load, and the TPS2013A at 2.2-A load (see Available Options). The TPS201xA is available in an 8-pin small-outline integrated-circuit (SOIC) package and in a 14-pin thin-shrink small-outline package (TSSOP) and operates over a junction temperature range of -40°C to 125°C.)

TPS2010

POWER-DISTRIBUTION

TPS2010

POWER-DISTRIBUTION

TPS2010

POWER-DISTRIBUTION

TPS2010_16

POWER-DISTRIBUTION

TPS2010A

POWER-DISTRIBUTION SWITCHES

TPS2010A

POWER-DISTRIBUTION SWITCHES