TPMC872-DOC中文资料TEWS数据手册PDF规格书

Application Information

The TPMC872 is a standard single-width 32 bit PMC module providing one or two sockets for 16 bit PC Card or 32 bit CardBus Cards using a dual socket PC Card / CardBus controller and a power management unit. The first CardBus / PC Card socket is mounted on the component side of the PMC. This socket supports card types I and II. The second PC Card / CardBus socket is mounted on the solder side of the PMC (TPMC872-2x only), supporting card types I, II and III.

The register map of the PC Card controller is Intel 82365-DF compatible.

The power management unit provides 3.3V or 5.0V PC Card / CardBus power supply and 3.3V, 5.0V or 12V PC Card / CardBus programming voltage. Due to the short circuit and thermal protection of the power management unit no external fuses are needed on the module.

The TPMC872 provides full ExCA register implementation for 16 bit PC Cards compatible with PCMCIA 2.1/JEIDA 4.2 standards. Both memory and I/O cards are supported.

Up to five memory windows and up to two I/O windows are available for PC Card16 accesses. For 32 bit CardBus cards two memory windows and two I/O windows are supported by the controller. CardBus card status information can be accessed in five card bus socket registers which can be mapped in the host memory space.

Note: The PC Card assembly has a maximum component height of 5.6mm which is 0.9mm above the specified component height (4.7mm) according to

IEEE1386.1. The second PC Card socket is assembled on the solder side of the PMC, requiring additional space.

The TPMC872-10, -11 and -12 have one PC Card / CardBus socket:

-10: The inserted card is accessible through the PMC front panel.

-11: The socket is relegated so that the inserted card is aligned with the PMC board border. It has no PMC front panel.

-12: The socket is relegated so that the inserted card is aligned with the PMC board border. It has a PMC front panel.