Isolated 2 x CAN Bus

Application Information The TPMC810 is a standard single-width 32 bit PMC with two independent CAN bus channels, isolated from system logic and from each other. Two Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used. CAN High Speed transceivers are used for the CAN b

文件：499.15 Kbytes 页数：2 Pages

TEWS

Two Independent Channel Extended CAN Bus

The TPMC810 is a standard single-width 32 bit PMC with two independent CAN bus channels, isolated from system logic and from each other.\n\nTwo Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used.\n\nCAN High Speed transceivers are used for the CAN bus I/O interface. An on bo • Standard single-width 32 bit PMC module\n• 2 independent CAN bus channels\n• CAN specification 2.0B supported\n• On board termination can be configured\n• Front panel I/O (2 DB9 male connectors) and P14 I/O;

TEWS

Isolated 2 x CAN Bus

Application Information The TPMC810 is a standard single-width 32 bit PMC with two independent CAN bus channels, isolated from system logic and from each other. Two Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used. CAN High Speed transceivers are used for the CAN b

文件：499.15 Kbytes 页数：2 Pages

TEWS

Isolated 2 x CAN Bus

Application Information The TPMC810 is a standard single-width 32 bit PMC with two independent CAN bus channels, isolated from system logic and from each other. Two Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used. CAN High Speed transceivers are used for the CAN b

文件：499.15 Kbytes 页数：2 Pages

TEWS

Isolated 2 x CAN Bus

Application Information The TPMC810 is a standard single-width 32 bit PMC with two independent CAN bus channels, isolated from system logic and from each other. Two Philips SJA1000 CAN controllers (CAN specification 2.0B supported) are used. CAN High Speed transceivers are used for the CAN b

文件：499.15 Kbytes 页数：2 Pages

TEWS