TPL9201数据手册集成电路（IC）的配电开关负载驱动器规格书PDF

描述 Description

The power supply provides regulated 5-V output to power the system microcontroller and drive eight low-side switches. The AC zero-detect circuitry is monitoring the crossover voltage of the mains AC supply. The resultant signal is a low-frequency clock output on the ZVS terminal, based on the AC-line cycle. This information allows the microcontroller to reduce in-rush current by powering loads on the AC-line peak voltage. A serial communications interface controls the eight low-side outputs; each output has an internal snubber circuit to absorb the energy in the inductor at turn OFF. Alternatively, the system can use a fly-back diode to VIN to help recirculate the energy in an inductive load at turn OFF.

特性 Features

• Eight Low-Side Drivers With Internal Clamp for Inductive Loads and Current Limiting for Self Protection
• Seven Outputs Rated at 150 mA and Controlled Through Serial Interface
• One Output Rated at 150 mA and Controlled Through Serial Interface and Dedicated Enable Pin

• 5-V ±5% Regulated Power Supply With 200-mA Load Capability at VIN Max of 18 V
• Internal Voltage Supervisory for Regulated Output
• Serial Communications for Control of Eight Low-Side Drivers
• Enable/Disable Input for OUT1
• 5-V or 3.3-V I/O Tolerant for Interface to Microcontroller
• Programmable Power-On Reset Delay Before RST Asserted High, Once 5 V Is Within Specified Range (6 ms Typ)
• Programmable Deglitch Timer Before RST Is Asserted Low (40 µs Typ)
• Zero-Voltage Detection Signal
• Thermal Shutdown for Self Protection
• APPLICATIONS
• Electrical Appliances
• Air Conditioning Units
• Ranges
• Dishwashers
• Refrigerators
• Microwaves
• Washing Machines

• General-Purpose Interface Circuits, Allowing Microcontroller Interface to Relays, Electric Motors, LEDs, and Buzzers

PowerPAD is a trademark of Texas Instruments.