TPL0102-100PWR.B中文资料德州仪器数据手册PDF规格书

1 Features

1• Two Potentiometers with 256-Position Resolution

• Non-volatile Memory Stores Wiper Settings

• 100 kΩ End-to-End Resistance (TPL0102-100)

• Fast Power-up Response Time to Wiper Setting:

<100 μs

• ±0.5 LSB INL, ±0.25 LSB DNL (Voltage-Divider

Mode)

• 4 ppm/°C Ratiometric Temperature Coefficient

• I2C-compatible Serial Interface

• 2.7 V to 5.5 V Single-Supply Operation

• ±2.25 V to ±2.75 V Dual-Supply Operation

• Operating Temperature Range from –40°C to

85°C

• Shutdown Mode

• ESD Performance Tested Per JESD 22

– 2000-V Human Body Model (A114-B, Class II)

– 1000-V Charged-Device Model (C101)

2 Applications

• Adjustable Gain Amplifiers and Offset Trimming

• Adjustable Power Supplies

• Precision Calibration of Set Point Thresholds

• Sensor Trimming and Calibration

• Mechanical Potentiometer Replacement

3 Description

The TPL0102 has two linear-taper digital

potentiometers (DPOTs) with 256 wiper positions.

Each potentiometer can be used as a three-terminal

potentiometer or as a two-terminal rheostat. The

TPL0102-100 has an end-to-end resistance of 100

kΩ.

The TPL0102 has non-volatile memory (EEPROM)

which can be used to store the wiper position. This is

beneficial because the wiper position is stored even

during power-off and is automatically reinstated after

power-on. The internal registers of the TPL0102 can

be accessed using the I2C interface.

The TPL0102 is available in a 14-pin MicroQFN and

14-pin TSSOP package with a specified temperature

range of –40°C to 85°C.