TPA321

700mW 单声道、模拟输入 AB 类音频放大器; • Fully Specified for 3.3-V and 5-V Operation\n• Wide Power Supply Compatibility 2.5 V - 5.5 V\n• Output Power for RL = 8 \n• 350 mW at VDD = 5 V\n• 250 mW at VDD = 3.3 V\n \n• Ultralow Supply Current in Shutdown Mode...0.15 µA\n• Thermal and Short-Circuit Protection\n• Surface-Mount Packaging \n• SOIC\n• PowerPAD™ MSOP\n \n PowerPAD is a trademark of Texas Instruments.;

The TPA321 is a bridge-tied load (BTL) audio power amplifier developed especially for low-voltage applications where internal speakers are required. Operating with a 3.3-V supply, the TPA321 can deliver 250-mW of continuous power into a BTL 8- load at less than 1% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation was optimized for narrower band applications such as cellular communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. This device features a shutdown mode for power-sensitive applications with a quiescent current of 0.15 µA during shutdown. The TPA321 is available in an 8-pin SOIC surface-mount package and the surface-mount PowerPAD™ MSOP, which reduces board space by 50% and height by 40%.

TPA321

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321_07

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321_15

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321D

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321D

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321DG4

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321DGN

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS

TPA321DGN

350-mW MONO AUDIO POWER AMPLIFIER WITH DIFFERENTIAL INPUTS