TP1561中文资料Stable 3.8MHz, 130μA, RRIO, Single Op-amps数据手册3PEAK规格书

描述 Description

The TP156x series are CMOS single, dual, and quad RRIO op-amps with low offset, low power and stable high frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 3.8MHz bandwidth, 3.6V/μs slew rate and low distortion while drawing only 130μA of quiescent current per amplifier. The input common-mode voltage range extends 300mV beyond V– and V+, and the outputs swing rail-to-rail. The TP156x family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve input/output range and performance.

特性 Features

 Stable 3.8 MHz GBWP Over Temperature Range
 Stable 3.8 MHz GBWP in VCM from 0-V to VDD
 Very Low Supply Current: 130 μA per Amplifier
 Unity Gain Stable for Any Capacitive Load
 Offset Voltage: 3.0 mV Maximum
 Offset Voltage Temperature Drift: 0.6 μV/°C
 Input Bias Current: 1 pA Typical
 THD+Noise: -115 dB at 1kHz, -99 dB at 10kHz
 High CMRR/PSRR: 120 dB
 Beyond the Rails Input Common-Mode Range
  Outputs Swing to within 5 mV of Each Rail
 No Phase Reversal for Overdriven Inputs
 Drives 2 kΩ Resistive Loads
 Shutdown Current: 0.2 μA (TP1561N)
 Supply Voltage Range: 
       —  Single +2.1 V to +6.0 V Supply
       —  Or Dual ±1.05 V to ±3.0 V Supplies
 –40°C to 125°C Operation Temperature Range
 ESD Rating: 8KV – HBM, 2KV–CDM and 500V–MM
 Green, Popular Type Package

应用 Application

 Multimedia Audio 
 Headphone Drivers 
 LCD Drivers 
 Photo Diode Pre-amp 
 Medical Equipments 
 Portable Devices 
 ASIC Input or Output 
 Sensor Interfaces