丝印：TMUX7411F；Package：WQFN；TMUX741xF ±60 V Fault-Protected, 1:1 (SPST), 4-Channel Switches With Latch-Up Immunity and 1.8-V Logic

1 Features • Wide supply voltage range: – Single supply: 8 V to 44 V – Dual supply: ±5 V to ±22 V • Integrated fault protection: – Overvoltage protection, source to supplies or source to drain: ±85 V – Overvoltage protection: ±60 V – Powered-off protection: ±60 V – Interrupt flags to indi

文件：2.1537 Mbytes 页数：48 Pages

TI

德州仪器

TMUX741xF ±60 V Fault-Protected, 1:1 (SPST), 4-Channel Switches With Latch-Up Immunity and 1.8-V Logic

1 Features • Wide supply voltage range: – Single supply: 8 V to 44 V – Dual supply: ±5 V to ±22 V • Integrated fault protection: – Overvoltage protection, source to supplies or source to drain: ±85 V – Overvoltage protection: ±60 V – Powered-off protection: ±60 V – Interrupt flags to indi

文件：2.1537 Mbytes 页数：48 Pages

TI

德州仪器

TMUX741xF 짹60 V Fault-Protected, 1:1 (SPST), 4-Channel Switches with Latch-Up Immunity and 1.8-V Logic

文件：2.3682 Mbytes 页数：42 Pages

TI

德州仪器

TMUX741xF 짹60 V Fault-protected, 1:1 (SPST), 4-Channel Switches with 1.8-V Logic

文件：1.08151 Mbytes 页数：30 Pages

TI

德州仪器

TMUX741xF ±60 V Fault-Protected, 1:1 (SPST), 4-Channel Switches With Latch-Up Immunity and 1.8-V Logic

1 Features • Wide supply voltage range: – Single supply: 8 V to 44 V – Dual supply: ±5 V to ±22 V • Integrated fault protection: – Overvoltage protection, source to supplies or source to drain: ±85 V – Overvoltage protection: ±60 V – Powered-off protection: ±60 V – Interrupt flags to indi

文件：2.1537 Mbytes 页数：48 Pages

TI

德州仪器

TMUX741xF 짹60 V Fault-Protected, 1:1 (SPST), 4-Channel Switches with Latch-Up Immunity and 1.8-V Logic

文件：2.3682 Mbytes 页数：42 Pages

TI

德州仪器

具有 1.8V 逻辑电平的 ±60V 故障保护、1:1 (SPST) 四通道开关（四个低电平有效）

TMUX7411F、TMUX7412F 和 TMUX7413F 是互补金属氧化物半导体 (CMOS) 模拟开关，可提供 4 通道 1:1 (SPST) 配置。这些器件在双电源（±5V 至 ±22V）、单电源（8V 至 44V）或非对称电源（例如 VDD = 12V，VSS = –5 V）供电情况下运行良好。TMUX741xF 器件在通电和断电情况下均提供过压保护，适用于无法精确控制电源时序的应用。\n\n在通电和断电条件下，该器件可阻断最高 +60V 或 −60V 的对地故障电压。在没有电源的情况下，无论开关输入条件如何，开关通道都将保持关断状态，并且逻辑引脚上的任何控制信号都会被忽略。如果任 • 宽电源电压范围： \n• 双电源：±5V 至 ±22V\n• 集成故障保护： \n• 过压保护：±60V\n• 指示故障状态的中断标志\n• 器件构造可实现闩锁效应抑制\n• 低导通电阻：8.3Ω 典型值\n• 支持的逻辑电平：1.8V\n• 业界通用的 TSSOP 封装和较小的 WQFN 封装;

TI

德州仪器