TMS320F280037C中文资料德州仪器数据手册PDF规格书

1 Features

• TMS320C28x 32-bit DSP core at 120 MHz

– IEEE 754 Floating-Point Unit (FPU)

• Support for Fast Integer Division (FINTDIV)

– Trigonometric Math Unit (TMU)

• Support for Nonlinear Proportional Integral

Derivative (NLPID) control

– CRC Engine and Instructions (VCRC)

– Ten hardware breakpoints (with ERAD)

• Programmable Control Law Accelerator (CLA)

– 120 MHz

– IEEE 754 single-precision floating-point

instructions

– Executes code independently of main CPU

• On-chip memory

– 384KB (192KW) of flash (ECC-protected)

across three independent banks

– 69KB (34.5KW) of RAM (ECC-protected)

– Dual-zone security

– Secure Boot and JTAG Lock

• Clock and system control

– Two internal 10-MHz oscillators

– Crystal oscillator or external clock input

– Windowed watchdog timer module

– Missing clock detection circuitry

– Dual-clock Comparator (DCC)

• 3.3-V I/O design

– Internal VREG generation allows for singlesupply design

– Brownout reset (BOR) circuit

• System peripherals

– 6-channel Direct Memory Access (DMA) controller

– 55 individually programmable multiplexed

General-Purpose Input/Output (GPIO) pins

– 23 digital inputs on analog pins

– 2 digital inputs/outputs on analog pins (AGPIO)

– Enhanced Peripheral Interrupt Expansion (ePIE)

– Multiple low-power mode (LPM) support

– Embedded Real-time Analysis and Diagnostic (ERAD)

– Unique Identification (UID) number

• Communications peripherals

– One Power-Management Bus (PMBus) interface

– Two Inter-integrated Circuit (I2C) interfaces

– One Controller Area Network (CAN/DCAN) bus port

– One Controller Area Network with Flexible

Data-Rate (CAN FD/MCAN) bus port

– Two Serial Peripheral Interface (SPI) ports

– Two UART-compatible Serial Communication Interface (SCI)

– Two UART-compatible Local Interconnect

Network (LIN) interfaces

– Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)

• Analog system

– Three 4-MSPS, 12-bit Analog-to-Digital Converters (ADCs)

• Up to 23 external channels (includes the two gpdac outputs)

• Four integrated Post-Processing Blocks (PPB) per ADC

– Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)

• Digital glitch filters

– Two 12-bit buffered DAC outputs

• Enhanced control peripherals

– 16 ePWM channels with eight channels that have high-resolution capability (150-ps resolution)

• Integrated dead-band support

• Integrated hardware trip zones (TZs)

– Three Enhanced Capture (eCAP) modules

• High-resolution Capture (HRCAP) available

on one of the three eCAP modules

– Two Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes

– Eight Sigma-Delta Filter Module (SDFM) input channels (two parallel filters per channel)

• Standard SDFM data filtering

• Comparator filter for fast action for overvalue or undervalue condition

– Embedded Pattern Generator (EPG)

• Configurable Logic Block (CLB)

– 4 tiles

– Augments existing peripheral capability

– Supports position manager solutions

• Host Interface Controller (HIC)

– Access to internal memory from an external host

• Background CRC (BGCRC)

– One cycle CRC computation on 32 bits of data

• Advanced Encryption Standard (AES) accelerator

• Live Firmware Update (LFU)

– Fast context switching from old to new firmware

– Flash bank erase time improvements

• Diagnostic features

– Memory Power On Self Test (MPOST)

– Hardware Built-in Self Test (HWBIST)

• Package options:

– 100-pin Low-profile Quad Flatpack (LQFP) [PZ suffix]

– 80-pin Low-profile Quad Flatpack (LQFP) [PN suffix]

– 64-pin (LQFP) [PM suffix]

– 48-pin (LQFP) [PT suffix]

• Temperature options:

– Free-air (TA): –40°C to 125°C

– Junction (TJ): –40°C to 150°C