TMP75BID传感器变送器的温度传感器-模拟数字输出规格书PDF中文资料

TMP75BID属于传感器变送器的温度传感器-模拟数字输出。由德州仪器制造生产的TMP75BID温度传感器 - 模拟和数字输出模拟和数字输出温度传感器可用于测量环境热能量。特征包括传感器类型、本地感测温度、远程感测温度、输出类型、电源电压和分辨率。传感器类型为模拟本地/远程/红外、模拟数字、本地/远程、数字本地/远程/红外或内部，感应温度范围为 -55°C 至 200°C。

1 Features

1• Low-Voltage Alternative to LM75 and TMP75

• Digital Output with Standard Two-Wire Serial

Interface

• Up to 8 Pin-Programmable Bus Addresses

• Overtemperature ALERT Pin with Programmable

Trip Values

• Shutdown Mode for Battery Power Saving

• One-Shot Conversion Mode for Custom Update

Rates

• Operating Temperature Range: –55°C to +125°C

• Operating Supply Range: 1.4 V to 3.6 V

• Quiescent Current:

– 45 μA Active (typ)

– 0.3 μA Shutdown (typ)

• Accuracy:

– ±0.5°C (typ) from –20°C to +85°C

– ±1°C (typ) from –55°C to +125°C

• Resolution: 12 Bits (0.0625°C)

• Packages: SOIC-8 and VSSOP-8

2 Applications

• Server and Computer Thermal Management

• Telecommunication Equipment

• Office Machines

• Video Game Consoles

• Set-Top Boxes

• Power Supply and Battery Thermal Protection

• Thermostat Control

• Environmental Monitoring and HVAC

• Electrical Motor Driver Thermal Protection

3 Description

The TMP75B is an integrated digital temperature

sensor with a 12-bit analog-to-digital converter (ADC) that can operate at a 1.8-V supply, and is pin and

register compatible with the industry-standard LM75

and TMP75. This device is available in SOIC-8 and

VSSOP-8 packages, and requires no external

components to sense the temperature. The TMP75B

is capable of reading temperatures with a resolution

of 0.0625°C and is specified over a temperature

range of –55°C to +125°C.

The TMP75B features SMBus and two-wire interface

compatibility, and allows up to eight devices on the

same bus with the SMBus overtemperature alert

function. The programmable temperature limits and

the ALERT pin allow the sensor to operate as a

stand-alone thermostat, or an overtemperature alarm

for power throttling or system shutdown.

The factory-calibrated temperature accuracy and the

noise-immune digital interface make the TMP75B the

preferred solution for temperature compensation of

other sensors and electronic components, without the

need for additional system-level calibration or

elaborate board layout for distributed temperature

sensing.

The TMP75B is ideal for thermal management and

protection of a variety of consumer, computer,

communication, industrial, and environmental

applications.