TMP392传感器变送器的温度传感器-温控器-固态规格书PDF中文资料

TMP392属于传感器变送器的温度传感器-温控器-固态。由德州仪器制造生产的TMP392温度传感器 - 温控器 - 固态固态温控器产品是基于半导体的温度检测器件，具有双态输出，当测量温度超出固定界限或定义范围时，输出状态会相应地发生变化。此类产品包括提供预设温度阈值和可编程/可配置阈值的器件。

1 Features

• Resistor programmable temperature trip points

and hysteresis options

– Resistor tolerances contribute zero error

– Hysteresis options: 5°C, 10°C and 20°C

• Separate outputs for overtemperature or

undertemperature detection

– Channel A (overtemperature): +30 to +124°C,

2°C steps

– Channel B (undertemperature): –50 to +25°C,

5°C steps

• Accuracy level options (maximum at −55°C to

+130°C):

– A2 Level: ±3.0°C (±1.5°C from 0°C to +70°C)

– A3 Level: ±3.5°C (±2.0°C from 0°C to +70°C)

• Ultra-low power consumption: 0.5 μA typical at

25°C

• Supply voltage: 1.62 to 5.5 V

• Open-drain outputs

• Trip test function enables in-system testing

• Available in a SOT-563 (1.60-mm × 1.20-mm),

6-pin package

2 Applications

• DC/AC inverter

• DC/DC converter

• Temperature transmitters

• Environmental control systems (ECS)

• Power tools

• Power banks

• Wireless infrastructure

– WLAN/Wi-Fi access points

– Core routers

– Edge routers

– Macro remote radio units (RRU)

3 Description

The TMP390 device is part of a family of ultralow

power, dual channel, resistor programmable

temperature switches that enable protection and

detection of system thermal events from –50°C

to 130°C. The TMP390 offers independent

overtemperature (hot) and undertemperature (cold)

detection . The trip temperatures (TTRIP) and thermal

hysteresis (THYST) options are programmed by two

E96-series resistors (1% tolerance) on the SETA and

SETB pins. Channel A resistors can range from 1.05

KΩ to 909 KΩ, representing one of 48 unique values.

Channel B resistors can range from 10.5 KΩ to 909

KΩ

The value of the resistor to ground on SETA input

sets the TTRIP threshold of Channel A. The value

of the resistor to ground on SETB input sets the

TTRIP threshold of Channel B, as well as the THYST

options of 5°C, or 10°C for both channels, to prevent

undesired digital output switching. When the SETB

input is connected to ground, Channel A operates with

20°C hysteresis. Resistors accuracy has no impact to

TTRIP accuracy.

To enable customer board-level manufacturing, the

TMP390 supports a trip test function where the digital

outputs are activated by exercising the SETA or SETB

pin.