TMCS1123 Precision Hall-Effect Current Sensor With ±1100V Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 75 ARMS • Robust reinforced isolation – Withstand isolation voltage: 5000 VRMS – Reinforced working voltage: 1100 VDC • High accuracy – Sensitivity error: 0.3 – Sensitivity drift: 20 ppm/°C – Offset error: 0.5 mV – Offset drift: 5 μV/°C –

文件：1.85945 Mbytes 页数：35 Pages

TI

德州仪器

TMCS1123 Precision 250kHz Hall-Effect Current Sensor With ±1.3kV Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 80ARMS • Robust reinforced isolation – Withstand isolation voltage: 5kVRMS – Reinforced working voltage: 1.3kVDC • High accuracy – Sensitivity error: ±0.1 – Sensitivity thermal drift: ±20ppm/°C – Sensitivity lifetime drift: ±0.2 – Offset er

文件：3.06071 Mbytes 页数：42 Pages

TI

德州仪器

TMCS1123 Precision 250kHz Hall-Effect Current Sensor With Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 80ARMS • Robust reinforced isolation • High accuracy – Sensitivity error: ±0.1% – Sensitivity thermal drift: ±20ppm/°C – Sensitivity lifetime drift: ±0.2% – Offset error: ±0.2mV – Offset thermal drift: ±2μV/°C – Offset lifetime drif

文件：3.07718 Mbytes 页数：42 Pages

TI

德州仪器

±1100V reinforced isolation, 75ARMS 250kHz Hall-effect current sensor with AFR, reference and ALERT

TMCS1123 是一款电隔离霍尔效应电流传感器，具有业界出色的隔离功能和精度。该器件还提供与输入电流成正比的输出电压，且在所有灵敏度选项下均具有出色的线性度和低漂移。具有内置漂移补偿功能的精密信号调节电路能够在没有系统级校准的情况下，在温度和寿命范围内的最大总误差小于 1.75%，或在一次性室温校准（同时包括寿命和温度漂移）的情况下的最大总误差小于 1%。\n\n交流或直流输入电流流经内部导体，所产生的磁场可由集成式片上霍尔效应传感器进行测量。无磁芯结构消除了对磁集中器的需求。差分霍尔传感器可抑制外部杂散磁场产生的干扰。低导体电阻将可测量电流范围提高至 ±96A，同时更大程度 • High continuous current capability: 75 A RMS\n• Withstand isolation voltage: 5000 V RMS\n• High accuracy \n• Sensitivity drift: 20 ppm/°C\n• Offset drift: 5 µV/°C\n• Low lifetime drift: 0.5% (maximum)\n• Precision zero-current reference output\n• Low propagation delay: 600 ns\n• Operating supp;

TI

德州仪器

TMCS1123 Precision 250kHz Hall-Effect Current Sensor With ±1.3kV Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 80ARMS • Robust reinforced isolation – Withstand isolation voltage: 5kVRMS – Reinforced working voltage: 1.3kVDC • High accuracy – Sensitivity error: ±0.1% – Sensitivity thermal drift: ±20ppm/°C – Sensitivity lifetime drift: ±0.2% –

文件：3.06071 Mbytes 页数：42 Pages

TI

德州仪器

TMCS1123 Precision 250kHz Hall-Effect Current Sensor With Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 80ARMS • Robust reinforced isolation • High accuracy – Sensitivity error: ±0.1% – Sensitivity thermal drift: ±20ppm/°C – Sensitivity lifetime drift: ±0.2% – Offset error: ±0.2mV – Offset thermal drift: ±2μV/°C – Offset lifetime drif

文件：3.07718 Mbytes 页数：42 Pages

TI

德州仪器

TMCS1123 Precision Hall-Effect Current Sensor With ±1100V Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 75 ARMS • Robust reinforced isolation – Withstand isolation voltage: 5000 VRMS – Reinforced working voltage: 1100 VDC • High accuracy – Sensitivity error: 0.3 – Sensitivity drift: 20 ppm/°C – Offset error: 0.5 mV – Offset drift: 5 μV/°C –

文件：1.85945 Mbytes 页数：35 Pages

TI

德州仪器

TMCS1123 Precision 250kHz Hall-Effect Current Sensor With ±1.3kV Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 80ARMS • Robust reinforced isolation – Withstand isolation voltage: 5kVRMS – Reinforced working voltage: 1.3kVDC • High accuracy – Sensitivity error: ±0.1 – Sensitivity thermal drift: ±20ppm/°C – Sensitivity lifetime drift: ±0.2 – Offset er

文件：3.06071 Mbytes 页数：42 Pages

TI

德州仪器

TMCS1123 Precision 250kHz Hall-Effect Current Sensor With Reinforced Isolation Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • High continuous current capability: 80ARMS • Robust reinforced isolation • High accuracy – Sensitivity error: ±0.1% – Sensitivity thermal drift: ±20ppm/°C – Sensitivity lifetime drift: ±0.2% – Offset error: ±0.2mV – Offset thermal drift: ±2μV/°C – Offset lifetime drif

文件：3.07718 Mbytes 页数：42 Pages

TI

德州仪器

TMCS1123-Q1 AEC-Q100, Precision 250kHz Hall-Effect Current Sensor With Reinforced Working Voltage, Overcurrent Detection and Ambient Field Rejection

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to 125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • High continuous current capability: 80ARMS • Robust reinforced isolation • High accuracy – S

文件：3.1793 Mbytes 页数：47 Pages

TI

德州仪器