MODULE FOR STEPPER MOTORS

文件：757.26 Kbytes 页数：22 Pages

TRINAMIC

Closed Loop Stepper motor controller/driver module 12 to 48V, 3A, 256 µSteps, with USB, EtherCAT Interface

The TMCM-1310 is a fully closed single axis stepper control unit for all applications that require high reliability and dynamics. The device is powered by ADI Trinamic StallGuard2™, CoolStep™ and SpreadCycle™ chopper technology. The TMCM-1310 is capable of driving up to 4.3A of current from each out Bipolar stepper motor driverUp to 256 microsteps per full step\nHigh-efficient operation, low power dissipation\nDynamic current control\nIntegrated protection: overtemperature and undervoltage\nstallGuard2™ feature for stall detection ( for open loop operation)\nInterfacesUSB 2.0 full-speed (12Mbit;

ADI

亚德诺

Stepper cDriver™ Modules

The TMCM-1310 is a fully closed single axis stepper control unit for all applications that require high relieability and dynamics. The device is powered by Trinamic stallGuard2™, coolStep™ and spreadCycle™ chopper technology. The TMCM-1310 is capable of driving up to 4.3A of current from each output · programmable microstep table \n· stallGuard2™ \n· coolStep™ \n· spreadCycle™ ;

Trinamic

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 3A 10-52.5V LOAD

Trinamic Motion Control GmbH

MODULE FOR STEPPER MOTORS

文件：757.26 Kbytes 页数：22 Pages

TRINAMIC

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 配件 描述：CABLE LOOM FOR TMCM-1310

Trinamic Motion Control GmbH