PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

文件：1.5131 Mbytes 页数：24 Pages

TRINAMIC

Motor mountable stepper motor controller/driver module 6 to 23V, 1.2A, 256 µSteps, SixPoint ramp controller with CAN Interface, StallGuard, CoolStep, StealthChop

The TMCM-1270 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic stallGuard2™, coolStep™, spreadCycle™ chopper and stealthChop™ technology and has a sixPoint™ ramp generator. The TMCM-1270 is capable of driving \n• CAN bus interface\n• TMCL or CANopen protocol\n• Integrated SixPoint™ ramp motion controller\n• StealthChop™ silent PWM mode\n• SpreadCycle™ smart mixed decay\n• StallGuard2™ load detection\n• CoolStep™ autom. current scaling\n\n\n;

ADI

亚德诺

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

文件：1.5131 Mbytes 页数：24 Pages

TRINAMIC

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

文件：1.5131 Mbytes 页数：24 Pages

TRINAMIC

PD42-1270 Hardware Manual

Features • PANdrive™ smart motor • Supply Voltag +6 to +24V DC • CAN bus interface • TMCL or CANopen protocol • Integrated sixPoint™ ramp motion controller • stealthChop™ silent PWM mode • spreadCycle™ smart mixed decay • stallGuard2™ load detection • coolStep™ autom. current scaling Ap

文件：1.5131 Mbytes 页数：24 Pages

TRINAMIC

Stepper cDriver™ Modules

The TMCM-1270 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by Trinamic stallGuard2™, coolStep™, spreadCycle™ chopper and stealthChop™ technology and has a sixPoint™ ramp generator. The TMCM-1270 is capable of driving up · coolStep™ \n· spreadCycle™ \n· stallGuard2™ \n· stealthChop™ \n· microPlyer™ \n· programmable microstep table \n;

Trinamic

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 配件 描述：CABLE LOOM FOR TMCM-1270

Trinamic Motion Control GmbH

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 1.2A

Trinamic Motion Control GmbH

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 1.2A

Trinamic Motion Control GmbH