TMCM-035数据手册ADI中文资料规格书

描述 Description

The TMCM-035/SG-H is a compact motor driver module for highly dynamic or high-torque axis. It can be combined with the driver-less modules TMCM-3x1 or TMCM-3x2, or with any step / direction controller. Its small size and low power dissipation, together with the variety of three different control interfaces, make it an optimum solution for integration on any user board. The board can be connected to a baseboard or customized electronics with a pin connector. Applications are consumer and industrial controls, CNC power stages, lab automatization, robotics, pick- and place machines.
The related product version TMCM-035/SG-V obsolete.
Applications

Driver module for a highly dynamic or high torque axis
Easy integration through three different control interfaces into any user board

特性 Features

Electrical Data:Up to 3.5A RMS coil current (5A peak)
14V to 50V DC motor supply voltage
5V DC logic supply voltage
Interface:Step / Direction input (TTL/CMOS signal)
SPITM interface
Classical analog interface
Other:68 pin connector carries all signals
RoHS compliant
Size: 80x50mm² (credit card)
Highlights:Up 64 times microstepping, since version 2.0 (prev. versions up to 16)
Motor current settings via internal and / or external resistors
Up to 245kHz microstep frequency
ADI TRINAMIC driver technology: No heat sink required
StallGuardTM optional for SPI operation
Standby reduction programmable
“mixed-decay” mode for good microstep performance mode
low EME design for ease of use
Supported Motors:two-phase bipolar motors with 0.3A to 3.5A coil current